Engine Oil Filter Base - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 185-3630     | Strap Wrench As     | 1     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove engine oil filter (7) with Tooling (A) .
Show/hide table
Illustration 1 | g01061623 |
- Remove bolts (5) and remove hose assembly (8) and hose assembly (9) from oil filter adapter (4). Remove the O-ring seals from hose assembly (8) and hose assembly (9) .
- Remove bolts (2). Remove oil filter adapter (4) from oil filter base (6). Remove gasket (3) from the oil filter base.
- Remove bolts (1). Remove oil filter base (6) from the flywheel housing.
- Remove bolts (19) and remove hose assembly (8) and hose assembly (9) from adapter (18). Remove the O-ring seals from hose assembly (8) and hose assembly (9) .
Show/hide table
Illustration 2 | g01061717 |
- Remove bolts (11). Remove bolts (13) .
- Remove bolts (15). Remove oil filter base assembly (16) from the engine oil cooler and the cylinder block. Remove O-ring seals (10), (12), and (14) from the oil filter base assembly.
- Remove bolts (20) and remove adapter (4) from the oil filter base assembly. Remove O-ring seals (17) from the adapter.
Caterpillar Information System:
C-15 Petroleum Engine Engine Oil Filter Base - Disassemble
C-15 Petroleum Engine Engine Oil Filter Base - Assemble
C-15 Petroleum Engine Engine Oil Filter Base - Install
2004/03/29 New High Temperature Seals are Available {7555}
C-15 Petroleum Engine Air Inlet and Exhaust System
C13 Engines Engine Oil Level - Check
C13, C15, and C18 Generator Set Engines Basic Engine
3126B Petroleum Engine Reference Material
C9 Urban Transit Bus Engine Air Inlet Elbow
C-15 Petroleum Engine Fuel Filter Base - Install
C-15 Petroleum Engine Fuel Filter Base - Remove
C-15 Petroleum Engine Fuel Priming Pump - Remove and Install
3406E, C-10 and C-12 On-highway Engines 0026-05 Auxiliary Output #01 current low (69)
3406E, C-10 and C-12 On-highway Engines 0026-06 Auxiliary Output #01 current high (69)
3406E, C-10 and C-12 On-highway Engines 0040-05 Auxiliary Output #02 current low (66)
3406E, C-10 and C-12 On-highway Engines 0040-06 Auxiliary Output #02 current high (66)
3406E, C-10 and C-12 On-highway Engines 0051-05 Auxiliary Output #03 current low (67)
3406E, C-10 and C-12 On-highway Engines 0051-06 Auxiliary Output #03 Current High (67)
3406E, C-10 and C-12 On-highway Engines 0071-01 Idle Shutdown (47)
C13, C15, and C18 Generator Set Engines E096 High Fuel Pressure
C13, C15, and C18 Generator Set Engines E198 Low Fuel Pressure
C13, C15, and C18 Generator Set Engines E361 High Engine Coolant Temperature
C13, C15, and C18 Generator Set Engines E362 Engine Overspeed
3412E Petroleum Engine Model View Illustrations