Housing (Front) - Install
安装步骤
- 放置前壳体 (3) 。
Show/hide table
图 1 | g01011130 |
- 安装螺栓 (2) 。
- 拧紧油底壳螺栓。
- 安装发动机前支座 (4) 。
- 连接传感器 (1) 。
End By:
- 安装发动机曲轴传感器。 请参考 解体及组装, "发动机传感器 - 拆卸和安装"。
- 安装前齿轮总成。 请参考 解体及组装, "齿轮总成(前)- 安装"。
- 安装凸轮轴。 请参考 解体及组装, "凸轮轴 - 安装"。
- 安装水泵。 请参考 解体及组装, "水泵 - 安装"。
- 安装发动机机油泵。 请参考 解体及组装, "发动机机油泵 - 安装"。
- 安装空气压缩机。 请参考 解体及组装, "空气压缩机 - 拆卸和安装"。
Caterpillar Information System:
C13 Engine Housing (Front) - Remove
C15 and C18 Petroleum Generator Sets Standby Generator Set Maintenance Recommendations
Cat® Digital Voltage Regulator General Information
C11 and C13 Engines Camshaft - Remove
C11 and C13 Engines Engine Sensors - Remove and Install
3406C Marine Auxiliary Generator Set Reference Material
C13 Engine Turbocharger - Install - Low Pressure Turbocharger
C13 Engine Turbocharger - Remove - Low Pressure Turbocharger
C32 Auxiliary Engine Battery Charger - Check
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C11 and C13 Engines Flywheel Housing - Remove and Install
C13 Engine Flywheel - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Accessory Drive - Remove
C11 and C13 Engines for Caterpillar Built Machines Accessory Drive - Install
3406C Marine Auxiliary Generator Set Engine Air Cleaner Element - Clean/Replace
C11 and C13 Engines Camshaft - Install
C9 On-highway Engines Engine Oil Level Gauge - Calibrate
2003/07/01 Replacement of the Piston Cooling Jet {1331}
C9 On-highway Engines Engine Oil and Filter - Change
C11 and C13 Engines for Caterpillar Built Machines Cylinder Liner - Remove
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Safety Messages