Flywheel Housing - Remove and Install
拆卸步骤
开始:
- 拆卸飞轮。 请参考解体及组装, "飞轮 - 拆卸"。
- 用垫块或合适的提升装置支撑好发动机。
- 拆卸螺栓 (1) 。
Show/hide table
图 1 | g01011078 |
- 拆卸飞轮壳体 (2) 。 飞轮壳体的重量约为 23 kg (50 lb)。
- 从后油封支架 (4) 上拆卸 O 形密封圈 (3) 。
Show/hide table
图 2 | g01011079 |
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 1U-6396     | O型密封圈装配附着剂     | 1     |
B     | 1U-8846     | 缸垫密封胶     | 1     |
- 在 O 形密封圈 (4) 上使用工具 (A) 。 将 O 形密封圈 (3) 安装到后油封支架 (4) 上。
Show/hide table
图 3 | g01011079 |
- 在缸体表面使用工具 (B) 。
- 将飞轮壳体 (2) 放置在缸体后部。 飞轮壳体 (2) 的重量约为 23 kg (50 lb)。
Show/hide table
图 4 | g01011078 |
- 安装螺栓 (1) 。
End By: 安装飞轮。 请参考 解体及组装, "飞轮 - 安装"。
Caterpillar Information System:
C13 Engine Flywheel - Install
C13 Engine Flywheel - Remove
C11 and C13 Engines Water Temperature Regulator - Remove and Install
C11 and C13 Engines Diverter Valve (Oil) - Install
C11 and C13 Engines Diverter Valve (Oil) - Remove
C13 Engine Engine Control Module - Remove and Install
C11 and C13 Engines Air Compressor - Remove and Install
C13 Engine Exhaust Manifold - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C32 Auxiliary Engine Battery Charger - Check
C13 Engine Turbocharger - Remove - Low Pressure Turbocharger
C13 Engine Turbocharger - Install - Low Pressure Turbocharger
3406C Marine Auxiliary Generator Set Reference Material
C11 and C13 Engines Engine Sensors - Remove and Install
C11 and C13 Engines Camshaft - Remove
Cat® Digital Voltage Regulator General Information
C15 and C18 Petroleum Generator Sets Standby Generator Set Maintenance Recommendations
C13 Engine Housing (Front) - Remove
C13 Engine Housing (Front) - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install