Engine Oil Pump - Assemble
- Pasang rakitan poros (5) dan rakitan poros (8) pada pompa oli engine (4).
- Pasang seal oli (6).
- Pasang penutup (2) pada pompa oli engine (4).
- Pasang baut (3).
- Tingkatkan temperatur roda gigi (7).
- Pasang roda gigi (7). Dimensi (X) adalah
29.40 ± 0.50 mm (1.158 ± 0.020 inch) . - Pasang elbow (1) pada penutup (2).
Show/hide table
Ilustrasi 1 | g01146941 |
Show/hide table
Ilustrasi 2 | g01146945 |
Show/hide table
Ilustrasi 3 | g01146930 |
Diakhiri dengan:
- Pasang pompa oli engine. Rujuk ke Pembongkaran dan Perakitan, "Pompa Oli Engine - Pemasangan".
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C11 and C13 Engines Engine Oil Filter Base - Install
C11 and C13 Engines Engine Oil Filter Base - Remove
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 On-highway Engine Valve Mechanism Cover - Remove and Install
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620}
C15 On-highway Engine Valve Actuator (Variable) - Install
C13 Engine Exhaust Manifold - Remove and Install
C11 and C13 Engines Air Compressor - Remove and Install
C13 Engine Engine Control Module - Remove and Install
C11 and C13 Engines Diverter Valve (Oil) - Remove
C11 and C13 Engines Diverter Valve (Oil) - Install
C11 and C13 Engines Water Temperature Regulator - Remove and Install
C13 Engine Flywheel - Remove
C13 Engine Flywheel - Install
C11 and C13 Engines Flywheel Housing - Remove and Install
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C32 Auxiliary Engine Battery Charger - Check
C13 Engine Turbocharger - Remove - Low Pressure Turbocharger