C11 and C13 Engines for Caterpillar Built Machines Caterpillar


Engine Oil Pump - Disassemble

Usage:

D8N 1XJ

Prosedur Pembongkaran

Tabel 1
Alat yang Diperlukan 
Alat  Nomor Suku Cadang  Keterangan Suku Cadang  Jml 
5F-7344  Blok Alat Penarik 
7S-7786 Kaki Penarik 
5F-7345 Sekrup 

Dimulai dengan:

  1. Lepaskan pompa oli engine. Rujuk ke Pembongkaran dan Perakitan, "Pompa Oli Engine - Pelepasan".


    Ilustrasi 1g01146930


    Ilustrasi 2g01146931

  1. Lepaskan elbow (1) dari penutup (2).

  2. Lepaskan baut (3).

  3. Lepaskan penutup (2) dari pompa oli engine (4).

  4. Gunakan Peralatan (A) untuk melepaskan roda gigi (7).

  5. Lepaskan rakitan poros (5) dan rakitan poros (8) dari pompa oli engine (4).

  6. Lepaskan seal oli (6).

Caterpillar Information System:

C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C11 and C13 Engines Engine Oil Filter Base - Install
C11 and C13 Engines Engine Oil Filter Base - Remove
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 On-highway Engine Valve Mechanism Cover - Remove and Install
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620}
C15 On-highway Engine Valve Actuator (Variable) - Install
C15 On-highway Engine Valve Actuator (Variable) - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C13 Engine Exhaust Manifold - Remove and Install
C11 and C13 Engines Air Compressor - Remove and Install
C13 Engine Engine Control Module - Remove and Install
C11 and C13 Engines Diverter Valve (Oil) - Remove
C11 and C13 Engines Diverter Valve (Oil) - Install
C11 and C13 Engines Water Temperature Regulator - Remove and Install
C13 Engine Flywheel - Remove
C13 Engine Flywheel - Install
C11 and C13 Engines Flywheel Housing - Remove and Install
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C32 Auxiliary Engine Battery Charger - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.