Engine Oil Filter Base - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 185-3630     | 带式扳手组件     | 1     |
开始:
- 拆卸发动机机油冷却器。 请参考解体及组装, "发动机机油冷却器 - 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 拆卸机油滤清器 (5) 。
Show/hide table
图 1 | g01010791 |
- 断开软管组件 (1) 。
- 拆卸螺栓 (2) 。
- 拆卸螺栓 (4) 。
- 拆卸螺栓 (3) 。
- 拆卸机油滤清器座 (6) 。
Caterpillar Information System:
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 On-highway Engine Valve Mechanism Cover - Remove and Install
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620}
C15 On-highway Engine Valve Actuator (Variable) - Install
C15 On-highway Engine Valve Actuator (Variable) - Remove
C15 On-highway Engine Compression Brake - Install
C15 On-highway Engine Compression Brake - Remove
C15 On-highway Engine Compression Brake - Disassemble
C15 On-highway Engine Compression Brake - Assemble
C15 and C18 Petroleum Generator Sets Automatic Start/Stop - Inspect
C15 On-highway Engine Engine Control Module - Remove and Install
C11 and C13 Engines Engine Oil Filter Base - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C13 Engine Exhaust Manifold - Remove and Install
C11 and C13 Engines Air Compressor - Remove and Install
C13 Engine Engine Control Module - Remove and Install
C11 and C13 Engines Diverter Valve (Oil) - Remove
C11 and C13 Engines Diverter Valve (Oil) - Install