Compression Brake - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position compression brake (1) on the cylinder head. Install bolts (4). Install nut (3) onto the stud hand tight.
- Tighten bolts (4) and nut (3) to a torque of
50 ± 7 N·m (37 ± 5 lb ft) in the sequence shown. - Tighten bolts (4) an additional 90° ± 5° in the sequence shown.
- Tighten nut (3) an additional 90° ± 5°.
- Connect harness assembly (2) to compression brake (1).
Show/hide table
Illustration 1 | g01010788 |
Show/hide table
Illustration 2 | g06212668 |
Torque Sequence |
End By:
- Refer to the Disassembly and Assembly Manual, "Valve Cover mechanism - Remove and Install".
Caterpillar Information System:
C15 On-highway Engine Compression Brake - Remove
C15 On-highway Engine Compression Brake - Disassemble
C15 On-highway Engine Compression Brake - Assemble
C15 and C18 Petroleum Generator Sets Automatic Start/Stop - Inspect
C15 On-highway Engine Engine Control Module - Remove and Install
C13 Engine Turbocharger - Install - High Pressure Turbocharger
C13 Engine Turbocharger - Remove - High Pressure Turbocharger
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Start-up Checklist
C15 On-highway Engine Diverter Valve (Coolant) - Disassemble
C15 On-highway Engine Diverter Valve (Coolant) - Assemble
2003/07/21 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 and C18 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C15 On-highway Engine Valve Actuator (Variable) - Remove
C15 On-highway Engine Valve Actuator (Variable) - Install
Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620}
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
C15 On-highway Engine Valve Mechanism Cover - Remove and Install
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C11 and C13 Engines Engine Oil Filter Base - Remove
C11 and C13 Engines Engine Oil Filter Base - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Install