Engine Oil Pump - Remove
Show/hide table
PERHATIAN |
---|
Berhati-hatilah agar cairan tidak tumpah selama pemeriksaan, perawatan, pengujian, penyetelan, dan perbaikan produk. Siapkan wadah penampung cairan sebelum membuka kompartemen atau membongkar komponen yang berisi cairan. |
Show/hide table
PERHATIAN |
---|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Putuskan rakitan pipa (1) dan rakitan pipa (2).
- Lepaskan baut (5).
- Lepaskan baut (4).
- Lepaskan pompa oli engine (3).
Show/hide table
Ilustrasi 1 | g01010793 |
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C11 and C13 Engines Engine Oil Filter Base - Install
C11 and C13 Engines Engine Oil Filter Base - Remove
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 On-highway Engine Valve Mechanism Cover - Remove and Install
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620}
C15 On-highway Engine Valve Actuator (Variable) - Install
C15 On-highway Engine Valve Actuator (Variable) - Remove
C15 On-highway Engine Compression Brake - Install
C15 On-highway Engine Compression Brake - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C13 Engine Exhaust Manifold - Remove and Install
C11 and C13 Engines Air Compressor - Remove and Install
C13 Engine Engine Control Module - Remove and Install
C11 and C13 Engines Diverter Valve (Oil) - Remove
C11 and C13 Engines Diverter Valve (Oil) - Install
C11 and C13 Engines Water Temperature Regulator - Remove and Install
C13 Engine Flywheel - Remove
C13 Engine Flywheel - Install
C11 and C13 Engines Flywheel Housing - Remove and Install