Exhaust Manifold - Remove and Install
拆卸步骤
开始:
- 拆卸高压涡轮增压器。 请参考解体及组装, "涡轮增压器 - 拆卸"。
- 拆卸预冷器。 请参考解体及组装, "预冷器 - 拆卸"。
- 拆卸低压涡轮增压器。 请参考解体及组装, "涡轮增压器 - 拆卸"。
- 拆卸预冷器下支架、上支架和中间支架。
Show/hide table
图 1 | g01010797 |
- 拆卸支架 (1) 。
- 拆卸排气歧管 (2) 。
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 5P-3931     | 防咬合剂     | 1     |
- 在螺柱上使用工具 (A) 。
Show/hide table
图 2 | g01010797 |
- 安装排气歧管 (2) 。 将螺母拧紧至扭矩 55 ± 10 N·m (41 ± 7 lb ft)。
- 安装支架 (1) 。
- 拆卸预冷器下支架、上支架和中间支架。
End By:
- 安装低压涡轮增压器。 请参考 解体及组装, "涡轮增压器 - 安装"。
- 安装预冷器。 请参考 解体及组装, "预冷器 - 安装"。
- 安装高压涡轮增压器。 请参考 解体及组装, "涡轮增压器 - 安装"。
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C11 and C13 Engines Engine Oil Filter Base - Install
C11 and C13 Engines Engine Oil Filter Base - Remove
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 On-highway Engine Valve Mechanism Cover - Remove and Install
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620}
C11 and C13 Engines Air Compressor - Remove and Install
C13 Engine Engine Control Module - Remove and Install
C11 and C13 Engines Diverter Valve (Oil) - Remove
C11 and C13 Engines Diverter Valve (Oil) - Install
C11 and C13 Engines Water Temperature Regulator - Remove and Install
C13 Engine Flywheel - Remove
C13 Engine Flywheel - Install
C11 and C13 Engines Flywheel Housing - Remove and Install
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C32 Auxiliary Engine Battery Charger - Check
C13 Engine Turbocharger - Remove - Low Pressure Turbocharger
C13 Engine Turbocharger - Install - Low Pressure Turbocharger