Valve Actuator (Variable) - Remove
Removal Procedure
Start By:
- Remove the valve mechanism cover. Refer to the Disassembly and Assembly Manual, "Valve Mechanism Cover - Remove and Install".
Note: DO NOT disassemble the variable valve actuator after the component has been removed. Any attempt to disassemble the variable valve actuator will void the warranty of the component.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assemblies (1) for variable valve actuator (2) .
Show/hide table
Illustration 1 | g01010697 |
- Remove nuts (3) that fasten variable valve actuator (2) to the cylinder head.
- Remove variable valve actuator (2) .
Caterpillar Information System:
C15 On-highway Engine Compression Brake - Install
C15 On-highway Engine Compression Brake - Remove
C15 On-highway Engine Compression Brake - Disassemble
C15 On-highway Engine Compression Brake - Assemble
C15 and C18 Petroleum Generator Sets Automatic Start/Stop - Inspect
C15 On-highway Engine Engine Control Module - Remove and Install
C13 Engine Turbocharger - Install - High Pressure Turbocharger
C13 Engine Turbocharger - Remove - High Pressure Turbocharger
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Start-up Checklist
C15 On-highway Engine Diverter Valve (Coolant) - Disassemble
C15 On-highway Engine Diverter Valve (Coolant) - Assemble
2003/07/21 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 On-highway Engine Valve Actuator (Variable) - Install
Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620}
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
C15 On-highway Engine Valve Mechanism Cover - Remove and Install
2003/09/01 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C11 and C13 Engines Engine Oil Filter Base - Remove
C11 and C13 Engines Engine Oil Filter Base - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble