Turbocharger - Remove - High Pressure Turbocharger
拆卸步骤
- 在波纹管上标上标记,用于在安装过程中对准和定位。
Show/hide table
图 1 | g01010642 |
- 松开卡箍 (2) 。
Show/hide table
注意 |
---|
不遵守下列规定程序可能导致零件损坏。 为了避免损坏零件,总是确认和标记零件,以便零件可以安装在相同的位置。 |
Show/hide table
波纹管的末端很锋利。 如果波纹管处理不妥当,可能会发生伤害。 通过波纹部位拿住波纹管。 |
注: 有关更多处理波纹管的信息,请参考专门说明书, REHS1728, "波纹管应用指南"。
- 将卡箍 (2) 放置在波纹管上。
- 松开卡箍 (3) 。
- 将卡箍 (3) 放置在波纹管上。
- 松开卡箍 (4) 。
- 松开卡箍 (7) 。
- 拆卸弯管 (5) 和弯管 (6) 。
- 断开供油管组件 (9) 和排油管组件 (10) 。
- 拆卸螺母 (1) 。
- 使用适当的提升装置。 涡轮增压器的重量约为 29 kg (65 lb)。 拆卸涡轮增压器 (8) 。
Caterpillar Information System:
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Start-up Checklist
C15 On-highway Engine Diverter Valve (Coolant) - Disassemble
C15 On-highway Engine Diverter Valve (Coolant) - Assemble
2003/07/21 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 and C18 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C11 and C13 Engines Valve Mechanism Cover Base - Remove and Install
C15 and C18 Petroleum Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C11 and C13 Engines Water Pump - Install
UPS 250 and UPS 300 Uninterruptible Power Supplies System Bypass Operation
2003/07/01 Prevent Coolant Leaks Around the Precombustion Chamber {1550}
3500B Locomotive Engines Turbocharger Support
C175–16 Locomotive Engine CAN Data Link
C13 Engine Turbocharger - Install - High Pressure Turbocharger
C15 On-highway Engine Engine Control Module - Remove and Install
C15 and C18 Petroleum Generator Sets Automatic Start/Stop - Inspect
C15 On-highway Engine Compression Brake - Assemble
C15 On-highway Engine Compression Brake - Disassemble
C15 On-highway Engine Compression Brake - Remove
C15 On-highway Engine Compression Brake - Install
C15 On-highway Engine Valve Actuator (Variable) - Remove
C15 On-highway Engine Valve Actuator (Variable) - Install
Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3606 and G3608 Engines{1901, 7620}
Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620} Installation of the ADEM 3 Control System on G3612 and G3616 Engines{1901, 7620}
C15 On-highway Engine Valve Mechanism Cover - Remove and Install