Valve Mechanism Cover Base - Remove and Install
拆卸步骤
开始:
- 拆卸气门执行器。 请参考解体及组装, "气门执行器(可变)- 拆卸"。
- 断开线束组件 (1) 、线束组件 (2) 和线束组件 (5) 。
Show/hide table
图 1 | g01010524 |
- 断开软管组件 (4) 。
- 拆卸螺栓 (6) 。
- 拆卸气门室盖座 (3) 。
安装步骤
- 放置气门盖底座 (3) 。
Show/hide table
图 2 | g01010524 |
- 安装螺栓 (6) 。
- 连接软管组件 (4) 。
- 连接线束组件 (1) 、线束组件 (2) 和线束组件 (5) 。
End By: 安装气门执行器。 请参考 解体和组装, "气门执行器(可变 - 安装"。
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C11 and C13 Engines Water Pump - Install
UPS 250 and UPS 300 Uninterruptible Power Supplies System Bypass Operation
2003/07/01 Prevent Coolant Leaks Around the Precombustion Chamber {1550}
3500B Locomotive Engines Turbocharger Support
C175–16 Locomotive Engine CAN Data Link
C7 On-highway Engine Refill Capacities and Recommendations
C7 On-highway Engine Engine Oil Level Gauge - Calibrate
C15 On-highway Engine Diverter Valve (Coolant) - Remove
C15 On-highway Engine Diverter Valve (Coolant) - Install
C15 On-highway Engine Pump Drive - Remove
C15 On-highway Engine Pump Drive - Install
C15 and C18 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
2003/07/21 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 On-highway Engine Diverter Valve (Coolant) - Assemble
C15 On-highway Engine Diverter Valve (Coolant) - Disassemble
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Start-up Checklist
C13 Engine Turbocharger - Remove - High Pressure Turbocharger
C13 Engine Turbocharger - Install - High Pressure Turbocharger
C15 On-highway Engine Engine Control Module - Remove and Install
C15 and C18 Petroleum Generator Sets Automatic Start/Stop - Inspect
C15 On-highway Engine Compression Brake - Assemble
C15 On-highway Engine Compression Brake - Disassemble
C15 On-highway Engine Compression Brake - Remove