Water Pump - Install
安装步骤
- 放置水泵 (14) 。
Show/hide table
图 1 | g01010401 |
- 安装螺栓 (13) 。
- 安装入口壳体 (12) 。
Show/hide table
图 2 | g01010400 |
- 安装接头 (10) 。
Show/hide table
图 3 | g01010398 |
- 拧紧卡箍 (9) 。
- 安装螺栓 (11) 。
- 连接管组件 (4) .
Show/hide table
图 4 | g01010397 |
- 安装支架 (7) 和支架 (8) 。
- 安装皮带轮 (5) 和螺栓 (6) 。
Show/hide table
图 5 | g01009922 |
- 将管组件 (4) 连接到壳体 (3) 。
Show/hide table
图 6 | g01009921 |
- 安装螺栓 (2) 。
- 连接软管组件 (1) 。
- 将下散热软管连接到水泵上。
- 安装风扇驱动皮带。
- 向冷却系统加注冷却液。 请参考操作和保养手册, "加注容量"。
Caterpillar Information System:
UPS 250 and UPS 300 Uninterruptible Power Supplies System Bypass Operation
2003/07/01 Prevent Coolant Leaks Around the Precombustion Chamber {1550}
3500B Locomotive Engines Turbocharger Support
C175–16 Locomotive Engine CAN Data Link
C7 On-highway Engine Refill Capacities and Recommendations
C7 On-highway Engine Engine Oil Level Gauge - Calibrate
C15 On-highway Engine Diverter Valve (Coolant) - Remove
C15 On-highway Engine Diverter Valve (Coolant) - Install
C15 On-highway Engine Pump Drive - Remove
C15 On-highway Engine Pump Drive - Install
C15 On-highway Engine Pump Drive - Disassemble
C15 On-highway Engine Pump Drive - Assemble
C15 and C18 Petroleum Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C11 and C13 Engines Valve Mechanism Cover Base - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
2003/07/21 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 On-highway Engine Diverter Valve (Coolant) - Assemble
C15 On-highway Engine Diverter Valve (Coolant) - Disassemble
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Start-up Checklist
C13 Engine Turbocharger - Remove - High Pressure Turbocharger
C13 Engine Turbocharger - Install - High Pressure Turbocharger
C15 On-highway Engine Engine Control Module - Remove and Install
C15 and C18 Petroleum Generator Sets Automatic Start/Stop - Inspect
C15 On-highway Engine Compression Brake - Assemble