Pump Drive - Assemble
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件说明 | 数量 |
A | 2P-8312 | 挡圈钳 | 1 |
C | 1P-0510 | 冲头总成 | 1 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 加热轴承 (1) 并将轴承安装到齿轮 (2) 上。
- 加热轴承 (6) 并将轴承安装到齿轮 (2) 上。
- 使用工具 (C) 和适当的压具将组装完成的轴承 (1)、轴承 (6) 和齿轮 (2) 装入适配器 (7) 中。
- 使用工具 (A) 安装挡圈 (5)。
- 使用螺栓 (3) 和挡圈 (4) 将适配器 (7) 固定在轴承 (6) 上。
Show/hide table
图 1 | g01050307 |
结束:
- 安装泵驱动装置。 请参阅拆解和组装, "泵驱动装置 - 安装"。
Caterpillar Information System:
G3520C and G3520E Engines Engine Mount
C11 and C13 Engines Water Pump - Remove
C7 On-highway Engines Turbocharger - Inspect
2003/07/21 A New Oversized Oil Pump Idler Gear Shaft is Available for 3054, 3054B, 3056 and 3056E Engines {1234, 1304}
2003/11/01 New Unit Injector Rocker Arm Is Now Used {1123}
G3520C and G3520E Generator Set Engines Valve Cover - Remove and Install
C4.4 (Mech) Industrial Engine Electrical System
C11 and C13 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
C11 and C13 Engines Fuel Filter Base - Remove and Install
C11 and C13 Engines Rocker Shaft and Pushrod - Install
C11 and C13 Engines Rocker Shaft and Pushrod - Remove
C15 On-highway Engine Pump Drive - Disassemble
C15 On-highway Engine Pump Drive - Install
C15 On-highway Engine Pump Drive - Remove
C15 On-highway Engine Diverter Valve (Coolant) - Install
C15 On-highway Engine Diverter Valve (Coolant) - Remove
C7 On-highway Engine Engine Oil Level Gauge - Calibrate
C7 On-highway Engine Refill Capacities and Recommendations
C175–16 Locomotive Engine CAN Data Link
3500B Locomotive Engines Turbocharger Support
2003/07/01 Prevent Coolant Leaks Around the Precombustion Chamber {1550}
UPS 250 and UPS 300 Uninterruptible Power Supplies System Bypass Operation
C11 and C13 Engines Water Pump - Install