Replacement of the Piston Cooling Jet {1331}
- Engine:
- 3406E (S/N: 5EK1-UP; 1MM1-UP; 2WS1-UP; 5DS1-UP; 6TS1-UP; 1LW1-UP)
- C-15 (S/N: EGH1-UP; MBN1-UP; 6NZ1-UP)
- C15 (S/N: BXS1-UP)
- C-16 (S/N: W1A1-UP; 7CZ1-UP)
It is important to use the correct piston cooling jets in an engine. The cooling jet for service may not look like the cooling jet that is replaced. Only replace a cooling jet if the cooling jet is not operational or the cooling jet is damaged. Replacement of all cooling jets is not necessary when you replace one cooling jet.
In order to find the proper piston cooling jet for your engine, refer to Table 1 or Table 2.
Show/hide table
3406E, C-15, and C-16 Engines     | ||||
Former Part Number     | Current Part Number     | Number of Tubes     | Bolt Size     | Part Number for Bolt     |
7W-4990     | 7W-4990     | One     | 3/8 inch     | 111-8606     |
151-5929     | 151-5929     | One     | 7/16 inch     | 151-5925     |
100-3851 145-6860 166-3650     |
166-3650     | Two     | 3/8 inch     | 111-8606     |
151-5931 158-0449 168-4539 197-9336     |
197-9336     | Two     | 7/16 inch     | 151-5925     |
Show/hide table
C15 Engines (Serial Number S/N:BXS1-UP )     |
||||
Former Part Number     | Current Part Number     | Number of Tubes     | Bolt Size     | Part Number for Bolt     |
197-9361     | 197-9361     | Two     | 7/16 inch     | 151-5925     |
Caterpillar Information System:
C9 On-highway Engines Engine Oil Level Gauge - Calibrate
C11 and C13 Engines Camshaft - Install
3406C Marine Auxiliary Generator Set Engine Air Cleaner Element - Clean/Replace
C11 and C13 Engines for Caterpillar Built Machines Accessory Drive - Install
C11 and C13 Engines for Caterpillar Built Machines Accessory Drive - Remove
C11 and C13 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C13 Engine Housing (Front) - Install
C13 Engine Housing (Front) - Remove
C15 and C18 Petroleum Generator Sets Standby Generator Set Maintenance Recommendations
Cat® Digital Voltage Regulator General Information
C11 and C13 Engines Camshaft - Remove
C9 On-highway Engines Engine Oil and Filter - Change
C11 and C13 Engines for Caterpillar Built Machines Cylinder Liner - Remove
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Safety Messages
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Model View Illustrations
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Plate Locations and Film Locations
C11 and C13 Engines for Caterpillar Built Machines Cylinder Liner - Install
C11 and C13 Engines Lifter Group - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
G3520C and G3520E Generator Set Engines Engine Governing
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install