Camshaft - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 201-4211     | 凸轮轴导向器     | 1     |
201-4212 | 凸轮轴导向器     | 1     |
- 安装工具 (A) 。
注: 确保凸轮轴 (2) 和工具 (A) 是清洁的。 将清洁的发动机机油涂抹到凸轮轴 (2) 的凸轮和轴颈和工具 (A) 。
Show/hide table
图 1 | g01011042 |
- 在发动机内小心安装凸轮轴 (2) 。
注: 安装凸轮轴 (2) 时,从两个方向旋转凸轮轴来防止凸轮轴轴承孔卡住。
- 确保惰轮上的正时标识 (3) 对准曲轴齿轮上的正时标识和凸轮轴驱动齿轮。
Show/hide table
注意 |
---|
安装凸轮轴时,确保 1 号缸位于压缩行程的上止点,并且正时螺栓安装在飞轮里。 凸轮轴正时是非常重要的。 凸轮轴驱动齿轮上的正时标记必须对准惰轮上的正时标记。 更多信息,请参考技术规格手册。 |
Show/hide table
图 2 | g00813917 |
- 安装螺栓 (1) 。 拆卸用来固定气门挺杆的电线。
Show/hide table
图 3 | g01011039 |
End By:
- 安装凸轮轴位置传感器。 参阅 解体及组装, "凸轮轴位置传感器 - 拆卸和安装"。
- 安装前盖。 请参考 解体及组装, "前盖 - 安装"。
- 安装摇臂轴和推杆。 请参考 解体及组装, "摇臂轴和推杆 - 安装"。
Caterpillar Information System:
3406C Marine Auxiliary Generator Set Engine Air Cleaner Element - Clean/Replace
C11 and C13 Engines for Caterpillar Built Machines Accessory Drive - Install
C11 and C13 Engines for Caterpillar Built Machines Accessory Drive - Remove
C11 and C13 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C13 Engine Housing (Front) - Install
C13 Engine Housing (Front) - Remove
C15 and C18 Petroleum Generator Sets Standby Generator Set Maintenance Recommendations
Cat® Digital Voltage Regulator General Information
C11 and C13 Engines Camshaft - Remove
C11 and C13 Engines Engine Sensors - Remove and Install
3406C Marine Auxiliary Generator Set Reference Material
C9 On-highway Engines Engine Oil Level Gauge - Calibrate
2003/07/01 Replacement of the Piston Cooling Jet {1331}
C9 On-highway Engines Engine Oil and Filter - Change
C11 and C13 Engines for Caterpillar Built Machines Cylinder Liner - Remove
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Safety Messages
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Model View Illustrations
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Plate Locations and Film Locations
C11 and C13 Engines for Caterpillar Built Machines Cylinder Liner - Install
C11 and C13 Engines Lifter Group - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
G3520C and G3520E Generator Set Engines Engine Governing