Replacement of the ECM for Heavy-Duty On-Highway Engines {1901}
- On-Highway Engines:
- C-10 (S/N: 3CS1-UP; MBJ1-UP)
- C-12 (S/N: CPD1-UP; MBL1-UP; 2KS1-UP)
- C-15 (S/N: 6NZ1-UP; MBN1-UP)
- C-16 (S/N: W1A1-UP; 7CZ1-UP)
- C-18 (S/N: MDP1-UP; MEP1-UP)
Refer to the proper Parts Manual for the correct ECM on C-10, C-12, C-15, C-16, and C-18 Engines.
Caterpillar Information System:
3508C, 3512C and 3516C Marine Engines Auxiliary Water Pump - Install
Cat® Digital Voltage Regulator Remote Communication
C11, C13 and C15 On-highway Engines Input Selections
C11, C13 and C15 On-highway Engines Vehicle Speed Parameters
C11, C13 and C15 On-highway Engines Dedicated PTO Parameters
C11, C13 and C15 On-highway Engines Engine Monitoring Parameters
C11, C13 and C15 On-highway Engines Idle Parameters
C11, C13 and C15 On-highway Engines Engine/Gear Parameters
C3.3 Industrial Engine Fuel Injector - Install
3406C Marine Auxiliary Generator Set Gauges and Indicators
G3500 Engines Duplex Oil Filter - Adjust
2003/08/01 New Fabricated Tool for Piston Pin Installation {1225}
2003/10/01 Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01 Identifying the Prelube Circuit and the Air Start Circuit {1408}
120H and 135H Motor Graders Machine Systems Metering Pump (Steering) - Remove and Install
3512C HD SR500 Generator Sets Single Unit Operation
C15 and C18 Petroleum Generator Sets Parallel Operation
C7 On-highway Engine Turbocharger - Remove
C7 Engines for Combat and Tactical Vehicles Engine Oil Level Gauge - Calibrate
C7 On-highway Engine Turbocharger - Install
C7 On-highway Engine Cylinder Head - Remove
C7 On-highway Engine Cylinder Head - Install
C7 On-highway Engine Electronic Control Module - Remove and Install
2003/07/01 Quality of Remanufactured Camshafts {1210}