Turbocharger - Remove
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect tube assembly (2) and tube assembly (4) .
Show/hide table
 | |
| Illustration 1 | g01031222 |
- Remove nuts (1), turbocharger (3), and the gasket from the exhaust manifold.
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets Parallel Operation
3512C HD SR500 Generator Sets Single Unit Operation
120H and 135H Motor Graders Machine Systems Metering Pump (Steering) - Remove and Install
2003/07/01 Identifying the Prelube Circuit and the Air Start Circuit {1408}
2003/10/01 Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01 Replacement of the ECM for Heavy-Duty On-Highway Engines {1901}
3508C, 3512C and 3516C Marine Engines Auxiliary Water Pump - Install
Cat® Digital Voltage Regulator Remote Communication
C11, C13 and C15 On-highway Engines Input Selections
C11, C13 and C15 On-highway Engines Vehicle Speed Parameters
C11, C13 and C15 On-highway Engines Dedicated PTO Parameters
C11, C13 and C15 On-highway Engines Engine Monitoring Parameters
C7 Engines for Combat and Tactical Vehicles Engine Oil Level Gauge - Calibrate
C7 On-highway Engine Turbocharger - Install
C7 On-highway Engine Cylinder Head - Remove
C7 On-highway Engine Cylinder Head - Install
C7 On-highway Engine Electronic Control Module - Remove and Install
2003/07/01 Quality of Remanufactured Camshafts {1210}
C11, C13 and C15 On-highway Engines 0283-07 Intake Valve Actuation Oil Pressure not responding (91)
C11 and C13 Engines Electronic Unit Injector - Remove
C11 and C13 Engines Electronic Unit Injector - Install
C11 and C13 Engines Rocker Shaft and Pushrod - Remove
C11 and C13 Engines Rocker Shaft and Pushrod - Install
C11 and C13 Engines Fuel Filter Base - Remove and Install