G3500 Engines Caterpillar


Duplex Oil Filter - Adjust

Usage:

G3508 2TJ


图 1g01008687
前视图
(1) 选择杆
(1) 销柱
(3) 支架
(4) 连接杆
(5) 杆

使用下述程序来调整转换阀:

  1. 将选择杆 (1)转动到"主工作(MAIN RUN)"位置,直到转换阀接触到盖总成内的止动销。

  2. 将销柱 (2)拧进选择杆内,直到销柱球头落座于支架 (3)顶部的孔内。

  3. 调整连接杆 (4)和杆端,以便提供选择杆和杆 (5)之间的连接。


    图 2g01008688
    右视图
    (6) 锁紧螺母
    (7) 螺母
    (8) 轴

  4. 松开锁紧螺母 (6)和螺母 (7)。

  5. 拧紧螺母 (7)至扭矩大约为 3 N·m (27 lb in)。 划一个记号来定位螺母的一个角。 将螺母旋开30度,以使轴 (8)能够轴向移动。

    轴的轴向移动量 ... 0.22 ± 0.08 mm (0.009 ± 0.003 inch)

  6. 使用扳手固定住螺母 (7)的位置,拧紧锁紧螺母 (6)。

    扭矩 ... 45 ± 7 N·m (33 ± 5 lb ft)

  7. 移动选择杆,以使转换阀在其整个行程范围移动。

    正确调整的转换阀可自如移动而不卡滞。

    必要时重新调整转换阀。

Caterpillar Information System:

2003/08/01 New Fabricated Tool for Piston Pin Installation {1225}
C15 On-highway Engine Gear Group (Front) - Install
C15 On-highway Engine Gear Group (Front) - Remove
C3.4 IND Industrial Engine Fuel System Primary Filter/Water Separator - Drain
C3.4 IND Industrial Engine Fuel System - Prime
2003/07/14 Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/01 Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01 Make Sure That the Shunt Tank's Filler Neck is Vented {1354, 1377}
2003/07/01 Align the Balancer Gears {1204, 1206, 1220}
2003/07/01 Improved Auxiliary Pumps are Used {1371}
C15 On-highway Engine Flywheel Housing - Remove and Install
2012/10/26 Policy for the Reuse of the Turbocharger Turbine Housing {1065}
3406C Marine Auxiliary Generator Set Gauges and Indicators
C3.3 Industrial Engine Fuel Injector - Install
C11, C13 and C15 On-highway Engines Engine/Gear Parameters
C11, C13 and C15 On-highway Engines Idle Parameters
C11, C13 and C15 On-highway Engines Engine Monitoring Parameters
C11, C13 and C15 On-highway Engines Dedicated PTO Parameters
C11, C13 and C15 On-highway Engines Vehicle Speed Parameters
C11, C13 and C15 On-highway Engines Input Selections
Cat® Digital Voltage Regulator Remote Communication
3508C, 3512C and 3516C Marine Engines Auxiliary Water Pump - Install
2003/07/01 Replacement of the ECM for Heavy-Duty On-Highway Engines {1901}
2003/10/01 Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.