Valve Guides - Remove and Install
Show/hide table
Required Tools | |||
Tooling | Part Number | Description | Qty |
A | 9U-7349 | Valve Driver | 1 |
B | 7S-8858 | Bushing Driver | 1 |
Start By:
- Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
- Use Tooling (A) in order to remove valve guides (1) from the cylinder head.
Show/hide table
Illustration 1 | g01000987 |
Show/hide table
Illustration 2 | g01001039 |
Show/hide table
Required Tools | |||
Tooling | Part Number | Description | Qty |
A | 9U-7349 | Valve Driver | 1 |
B | 7S-8858 | Bushing Driver | 1 |
- Apply clean engine oil on the outside diameter of valve guide (1).
Show/hide table
Illustration 3 g01000994 - Use Tooling (A) and (B) in order to install valve guides (1).
- The inside diameter of valve guide (1) after installation must be
9.484 ± 0.025 mm (0.3734 ± 0.0010 inch) .
End By:
- Install the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Caterpillar Information System:
3500B and 3500C Marine Propulsion Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
2003/06/01 Service Literature is Now Available {0375, 7568}
G3500 Engines MID 014 - CID 0329 - FMI 11 Communication Fault with CAT A/F Ratio Control
G3500 Engines MID 014 - CID 0328 - FMI 02 Number of Cylinders mismatch
2003/06/01 A New Personality Module is Available for G3600 Engines {1902, 7620}
G3500 Engines MID 014 - CID 0327 - FMI 02 Number of Detonation Sensors mismatch
G3500 Engines MID 014 - CID 0326 - FMI 01 Detonation Retarded Timing
C9 Marine Engines Safety Messages
G3500 Engines MID 014 - CID 0325 - FMI 00 Excessive Detonation
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
G3304 and G3306 Engines Engine Oil Pan Plate - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Housing (Front) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
2003/06/01 Guidelines for Modifying the Cylinder Head and the Prechamber Assembly for 1/2 Inch Bolts {1101}
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
3500B Series II Marine Engines MID 036 - CID 0799 - FMI 12 Need Service tool update
3500B Series II Marine Engines Event Codes
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Assemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
C-10, C-12, C-15 and C-16 Industrial Engines E004 Engine Overspeed Shutdown
G3304 and G3306 Engines Valve Seat Inserts - Remove and Install
3500B Series II Marine Engines E039 Low Engine Oil Pressure Derate
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Remove