3500B and 3500C Marine Propulsion Engines Caterpillar


MID 036 - CID 0268 - FMI 02 Check Programmable Parameters

Usage:

3516B B5G
产生此代码的情况:

一个或多个可编程参数未进行编程设定:

  • 发动机序列号

  • 全负荷设定值(FLS)

  • 全扭矩设定值(FTS)

  • 额定燃油位置

系统响应:

将记录该代码。 发动机性能和/或系统工作可能会受到影响。

测试步骤 1.

  1. 检查有无未编程设定的参数。

结果:

  • 正常 - 一个参数未编程设定。

    修复: 编程设定缺失参数。 请参阅故障诊断与排除, "系统配置参数"中的诊断程序。

    停止

Caterpillar Information System:

2003/06/01 Service Literature is Now Available {0375, 7568}
G3500 Engines MID 014 - CID 0329 - FMI 11 Communication Fault with CAT A/F Ratio Control
G3500 Engines MID 014 - CID 0328 - FMI 02 Number of Cylinders mismatch
2003/06/01 A New Personality Module is Available for G3600 Engines {1902, 7620}
G3500 Engines MID 014 - CID 0327 - FMI 02 Number of Detonation Sensors mismatch
G3500 Engines MID 014 - CID 0326 - FMI 01 Detonation Retarded Timing
C9 Marine Engines Safety Messages
G3500 Engines MID 014 - CID 0325 - FMI 00 Excessive Detonation
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
G3304 and G3306 Engines Engine Oil Pan Plate - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Housing (Front) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Housing (Front) - Remove
G3304 and G3306 Engines Valve Guides - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
2003/06/01 Guidelines for Modifying the Cylinder Head and the Prechamber Assembly for 1/2 Inch Bolts {1101}
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
3500B Series II Marine Engines MID 036 - CID 0799 - FMI 12 Need Service tool update
3500B Series II Marine Engines Event Codes
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Assemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
C-10, C-12, C-15 and C-16 Industrial Engines E004 Engine Overspeed Shutdown
G3304 and G3306 Engines Valve Seat Inserts - Remove and Install
3500B Series II Marine Engines E039 Low Engine Oil Pressure Derate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.