Rocker Shaft and Pushrod - Remove
Removal Procedure
Start By:
- Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Loosen each nut and adjustment screw (1) by one rotation.
Show/hide table
 | |
| Illustration 1 | g01035049 |
- Remove bolts (4) .
- Remove bolts (2) .
- Remove rocker shaft assembly (3) .
- Remove pushrods (5) .
Show/hide table
 | |
| Illustration 2 | g01035051 |
Caterpillar Information System:
3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
G3304 and G3306 Engines Valve Guides - Remove and Install
3500B and 3500C Marine Propulsion Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
2003/06/01 Service Literature is Now Available {0375, 7568}
G3500 Engines MID 014 - CID 0329 - FMI 11 Communication Fault with CAT A/F Ratio Control
G3500 Engines MID 014 - CID 0328 - FMI 02 Number of Cylinders mismatch
2003/06/01 A New Personality Module is Available for G3600 Engines {1902, 7620}
G3500 Engines MID 014 - CID 0327 - FMI 02 Number of Detonation Sensors mismatch
G3500 Engines MID 014 - CID 0326 - FMI 01 Detonation Retarded Timing
C9 Marine Engines Safety Messages
G3500 Engines MID 014 - CID 0325 - FMI 00 Excessive Detonation
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
2003/06/01 Guidelines for Modifying the Cylinder Head and the Prechamber Assembly for 1/2 Inch Bolts {1101}
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
3500B Series II Marine Engines MID 036 - CID 0799 - FMI 12 Need Service tool update
3500B Series II Marine Engines Event Codes
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Assemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
C-10, C-12, C-15 and C-16 Industrial Engines E004 Engine Overspeed Shutdown
G3304 and G3306 Engines Valve Seat Inserts - Remove and Install
3500B Series II Marine Engines E039 Low Engine Oil Pressure Derate
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Remove
PM820, PM822, and PM825 Cold Planer Engine Valve Lash - Check
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Install