G3500 Engines Caterpillar


MID 014 - CID 0326 - FMI 01 Detonation Retarded Timing

Usage:

G3508 2TJ
产生此代码的情况:

发生以下任一状况:

  • 爆震水平超过触发点。

  • 发动机的机械噪声超出正常限度。

  • 爆震传感电路发生过间歇性故障。

  • 次级点火系统产生过大噪声。

系统响应:

警告输出启动。 点火正时因爆震而延迟时,警告灯将持续亮起。 可以在数字诊断工具(DDT)或 Caterpillar 电子技师(ET)上查看该诊断代码。

测试步骤 1. 进行以下的诊断步骤: 爆震延迟和爆震停机

结果:

  • 正常 - 停止

Caterpillar Information System:

C9 Marine Engines Safety Messages
G3500 Engines MID 014 - CID 0325 - FMI 00 Excessive Detonation
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
G3304 and G3306 Engines Engine Oil Pan Plate - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Housing (Front) - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Housing (Front) - Remove
BA-921 Bendix Air Compressor General Troubleshooting Information
G3500B Engines Accumulator - Check
12H, 140H and 160H Motor Graders Power Train Differential and Bevel Gear - Assemble
12H, 140H and 160H Motor Graders Power Train Differential and Bevel Gear - Disassemble
G3500 Engines MID 014 - CID 0324 - FMI 05 Warning Lamp open/short to ground
G3500 Engines MID 014 - CID 0324 - FMI 03 Warning Lamp short to +batt
G3500 Engines MID 014 - CID 0327 - FMI 02 Number of Detonation Sensors mismatch
2003/06/01 A New Personality Module is Available for G3600 Engines {1902, 7620}
G3500 Engines MID 014 - CID 0328 - FMI 02 Number of Cylinders mismatch
G3500 Engines MID 014 - CID 0329 - FMI 11 Communication Fault with CAT A/F Ratio Control
2003/06/01 Service Literature is Now Available {0375, 7568}
3500B and 3500C Marine Propulsion Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
G3304 and G3306 Engines Valve Guides - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
2003/06/01 Guidelines for Modifying the Cylinder Head and the Prechamber Assembly for 1/2 Inch Bolts {1101}
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
3500B Series II Marine Engines MID 036 - CID 0799 - FMI 12 Need Service tool update
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.