Event codes alert the operator that an abnormal engine operating condition such as low oil pressure or high coolant temperature has been detected. Events do not indicate problems with the electronic system. Event codes also indicate the nature of the problem. Event codes may be viewed on a personal computer that has the software for the Caterpillar Electronic Technician (ET).
Illustration 1 | g00740986 |
Typical example |
Illustration 1 indicates output voltage from the coolant temperature sensor. Cat ET can be used to turn these features ON and OFF. When the features are turned ON, the display will appear on an electronic monitoring module and an event will also be logged in the ECM. When the features are turned OFF, the display will not appear on a monitoring module, but an event will still be logged.
Programmable Engine Parameters
You can program the engine to perform the following actions for some applications:
- Engine shutdown
- Engine alarm
- Engine derate
3500B System Event Codes | |
---|---|
Event Code | Description |
E004 | Engine Overspeed Shutdown |
E009 | High Altitude Derate |
E015 | High Engine Coolant Temperature Derate |
E016 | High Engine Coolant Temperature Shutdown |
E017 | High Engine Coolant Temperature Warning |
E038 | Low Engine Coolant Temperature Warning |
E039 | Low Engine Oil Pressure Derate |
E040 | Low Engine Oil Pressure Shutdown |
E100 | Low Engine Oil Pressure Warning |
E173 | High Exhaust Temperature Warning |
E190 | Engine Overspeed Warning |