Lifter Group - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-7262 | Telescoping Magnet | 1 |
Start By:
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove lifters (1) .
Note: Place an identification mark on the lifters for installation purposes.
Show/hide table
 | |
| Illustration 1 | g01034177 |
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-7262 | Telescoping Magnet | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Lubricate the lifters with clean engine oil before installing the lifters in the cylinder block.
- Use Tooling (A) to install lifters (1) .
Note: Ensure that the lifters are installed in the original location and that the lifters are seated correctly.
Show/hide table
| | |
| Illustration 2 | g01034177 |
End By: Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Caterpillar Information System:
G3304 and G3306 Engines Water Directors - Remove and Install
3500B Series II Marine Engines Air Shutoff System
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Install
PM820, PM822, and PM825 Cold Planer Engine Valve Lash - Check
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Remove
3500B Series II Marine Engines E039 Low Engine Oil Pressure Derate
G3304 and G3306 Engines Valve Seat Inserts - Remove and Install
C-10, C-12, C-15 and C-16 Industrial Engines E004 Engine Overspeed Shutdown
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft - Assemble
3500B Series II Marine Engines Event Codes
3500B Series II Marine Engines MID 036 - CID 0799 - FMI 12 Need Service tool update
G3304 and G3306 Engines Inlet and Exhaust Valves - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C9 On-highway Engine Water Pump
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Product Description
3500C Marine Propulsion Engines Specifications
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Refill Capacities
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Install
3500B Locomotive Engines Electronic Control Module (ECM)
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove