Inlet Manifold - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install gasket (13) and elbow assembly (12). Install bolts (11). Install bracket (10) and bolt (9) .
Show/hide table
 | |
| Illustration 1 | g01035495 |
- Install gasket (3) and position inlet manifold (2). Install bolts (1). Install bolts (4) and (5). Connect the hose assembly and tighten clamp (7). Position crankcase breather (8) and install bolts (6) .
Show/hide table
 | |
| Illustration 2 | g01035474 |
Caterpillar Information System:
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Refill Capacities
3500C Marine Propulsion Engines Specifications
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Product Description
C9 On-highway Engine Water Pump
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft - Remove and Install
G3304 and G3306 Engines Inlet and Exhaust Valves - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group - Remove and Install
G3304 and G3306 Engines Water Directors - Remove and Install
3500B Series II Marine Engines Air Shutoff System
3500B Locomotive Engines Electronic Control Module (ECM)
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
G3500 Engines MID 014 - CID 0330 - FMI 11 Propane Timing Mode requested
G3304 and G3306 Engines Air Cleaner - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
G3500 Engines MID 014 - CID 0331 - FMI 11 Ignition Shutdown requested
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
G3500 Engines MID 014 - CID 0591 - FMI 12 EEPROM checksum fault or ECM not programmed
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
G3304 and G3306 Engines Air Cleaner - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearings - Install