Inlet Manifold - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
ZZ     | 9U-7087     | Tapered Cap/Plug     | 1     |
9U-7089 | Tapered Cap/Plug     | 1     |
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (6) and position crankcase breather (8) out of the way. Loosen clamp (7) and disconnect the hose assembly. Remove bolts (4) and (5). Remove bolts (1). Remove inlet manifold (2) and gasket (3) .
Show/hide table
Illustration 1 | g01035474 |
- Remove bolt (9) and bracket (10). Remove bolts (11). Remove elbow assembly (12) and gasket (13) .
Show/hide table
Illustration 2 | g01035495 |
Caterpillar Information System:
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Refill Capacities
3500C Marine Propulsion Engines Specifications
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Product Description
C9 On-highway Engine Water Pump
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Camshaft - Remove and Install
G3304 and G3306 Engines Inlet and Exhaust Valves - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group - Remove and Install
G3304 and G3306 Engines Water Directors - Remove and Install
3500B Series II Marine Engines Air Shutoff System
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet Manifold - Install
3500B Locomotive Engines Electronic Control Module (ECM)
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
G3500 Engines MID 014 - CID 0330 - FMI 11 Propane Timing Mode requested
G3304 and G3306 Engines Air Cleaner - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
G3500 Engines MID 014 - CID 0331 - FMI 11 Ignition Shutdown requested
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
G3500 Engines MID 014 - CID 0591 - FMI 12 EEPROM checksum fault or ECM not programmed
3044C Industrial Engine and Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
G3304 and G3306 Engines Air Cleaner - Install