Lead Connections
Show/hide table
 |
The high voltage that is produced by an operating generator set can cause severe injury or death. Before performing any maintenance or repairs, ensure that the generator will not start. Place the engine control switch in the "OFF" position. Attach "DO NOT OPERATE" tags to all starting controls. Disconnect the batteries or disable the starting system. Lock out all switchgear and automatic transfer switches that are associated with the generator. |
 |
The following illustrations show the different ways that the generator can be configured. The connections for the windings are shown on the left side of the illustrations. The physical wiring of the terminal plate is shown on the right side of illustrations.
Show/hide table
 | |
| Illustration 1 | g00991820 |
Show/hide table
 | |
| Illustration 2 | g00991823 |
Show/hide table
 | |
| Illustration 3 | g00991825 |
Show/hide table
 | |
| Illustration 4 | g00991840 |
Show/hide table
 | |
| Illustration 5 | g00991935 |
Caterpillar Information System:
3044C Industrial Engine Gauges and Indicators
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Maintenance Interval Schedule
3500B Engines Air Inlet and Exhaust Lines
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 1495 - FMI 02 Injector Trim Codes Not Programmed
G3304 and G3306 Engines Carburetor - Remove
G3304 and G3306 Engines Carburetor - Install
C7 On-highway Engine Water Pump - Remove
G3304 and G3306 Engines Valve Lifter - Install
C1.5 and C2.2 Generator Generator - Install
G3304 and G3306 Engines Aftercooler - Install
2003/05/01 Installation Procedure for a Thermocouple in the Exhaust of a Marine Engine {7498}
3054E Industrial Engine Crankshaft Rear Seal - Remove
G3304 and G3306 Engines Water Pump - Remove
3054E Industrial Engine Flywheel - Install
G3304 and G3306 Engines Water Pump - Install
G3304 and G3306 Engines Water Pump - Disassemble
Installation Guide for Industrial Electronic Engine Displays General Information
3618 Engine Engine Mounts - Inspect
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070} Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
3044C Industrial Engine Fuel System - Prime
Installation Guide for Industrial Electronic Engine Displays Wiring - General
C7 On-highway Engine Water Pump - Install
3044C Industrial Engine Fuel System Filter - Replace
C1.5 and C2.2 Generator Leads - Connect