Carburetor - Install
- Install a new gasket on carburetor (1). Place carburetor (1) into position.
Show/hide table
Illustration 2 g00991665 - Install four bolts (2).
Show/hide table
Illustration 3 g00991667 - Slide hose (4) into position on carburetor (1). Tighten two clamps (3).
- Connect the joint assembly to the carburetor with clamp (6). Tighten the nut on the clamp to a torque of
5.5 ± 0.5 N·m (49 ± 4 lb in) . - Fasten control rod (5) to the carburetor lever on carburetor (1).
- Check the linkage adjustment. Refer to Testing and Adjusting, "Governor Adjustments" for the engine that is being serviced.
Show/hide table
Illustration 1 | g00991663 |
Caterpillar Information System:
C7 On-highway Engine Water Pump - Remove
G3304 and G3306 Engines Valve Lifter - Install
C1.5 and C2.2 Generator Generator - Install
G3304 and G3306 Engines Aftercooler - Install
2003/05/01 Installation Procedure for a Thermocouple in the Exhaust of a Marine Engine {7498}
3054E Industrial Engine Crankshaft Rear Seal - Remove
3618 Engine Driven Equipment - Check
G3304 and G3306 Engines Aftercooler - Remove
3618 Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Cold Weather Recommendations for On-Highway Diesel Truck Engines Starting Recommendations
3618 Engine Cooling System Coolant Sample (Level 1) - Obtain
3618 Engine Cooling System Coolant - Change
G3304 and G3306 Engines Carburetor - Remove
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 1495 - FMI 02 Injector Trim Codes Not Programmed
3500B Engines Air Inlet and Exhaust Lines
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Maintenance Interval Schedule
3044C Industrial Engine Gauges and Indicators
C1.5 and C2.2 Generator Lead Connections
G3304 and G3306 Engines Water Pump - Remove
3054E Industrial Engine Flywheel - Install
G3304 and G3306 Engines Water Pump - Install
G3304 and G3306 Engines Water Pump - Disassemble
Installation Guide for Industrial Electronic Engine Displays General Information
3618 Engine Engine Mounts - Inspect