Driven Equipment - Check
To minimize bearing problems and vibration of the engine crankshaft and the driven equipment, the alignment between the engine and driven equipment must be maintained properly.
Check the alignment according to the commissioning data and refer to the instructions that are provided by the following manufacturers:
- Caterpillar
- OEM of the coupling
- OEM of the driven equipment
- OEM of the vessel
Note: Caterpillar recommends the use of laser alignment tools in order to check the alignment of the driven equipment. Refer to the documentation above for specifications and alignment procedures.
Caterpillar Information System:
G3304 and G3306 Engines Aftercooler - Remove
3618 Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Cold Weather Recommendations for On-Highway Diesel Truck Engines Starting Recommendations
3618 Engine Cooling System Coolant Sample (Level 1) - Obtain
3618 Engine Cooling System Coolant - Change
G3304 and G3306 Engines Spark Plug Adapter - Remove and Install
C15 On-highway Engine Air Compressor - Remove and Install
C7 Engines for Combat and Tactical Vehicles Truck Manufacture Parameters
C7 Engines for Combat and Tactical Vehicles Vehicle Speed Parameters
G3304 and G3306 Engines Spark Plugs - Remove and Install
C7 Engines for Combat and Tactical Vehicles Trip Parameters
C7 Engines for Combat and Tactical Vehicles Maintenance Parameters
3054E Industrial Engine Crankshaft Rear Seal - Remove
2003/05/01 Installation Procedure for a Thermocouple in the Exhaust of a Marine Engine {7498}
G3304 and G3306 Engines Aftercooler - Install
C1.5 and C2.2 Generator Generator - Install
G3304 and G3306 Engines Valve Lifter - Install
C7 On-highway Engine Water Pump - Remove
G3304 and G3306 Engines Carburetor - Install
G3304 and G3306 Engines Carburetor - Remove
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 1495 - FMI 02 Injector Trim Codes Not Programmed
3500B Engines Air Inlet and Exhaust Lines
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Maintenance Interval Schedule
3044C Industrial Engine Gauges and Indicators