Truck Manufacture Parameters
"Truck Manufacturer"
The option for the "Truck Manufacturer" parameter is set at the factory to provide the same functionality with one Engine Control Module (ECM) and one set of personality module software. If an ECM replacement is required, the "Truck Manufacturer" parameter must be programmed before programming other customer parameters in order to configure the proper set of defaults and/or ranges.
Show/hide table
Alternative     | Default     |
    | "Other"     |
Caterpillar Information System:
C7 Engines for Combat and Tactical Vehicles Vehicle Speed Parameters
G3304 and G3306 Engines Spark Plugs - Remove and Install
C7 Engines for Combat and Tactical Vehicles Trip Parameters
C7 Engines for Combat and Tactical Vehicles Maintenance Parameters
C7 Engines for Combat and Tactical Vehicles Output Selections
C7 Engines for Combat and Tactical Vehicles Input Selections
C15 On-highway Engine Exhaust Manifold - Remove and Install
3500B and 3500C Marine Propulsion Engines Emergency Stop Switch (Remote)
G3304 and G3306 Engines Rocker Shaft - Assemble
G3304 and G3306 Engines Rocker Shaft - Disassemble
G3304 and G3306 Engines Crankshaft Main Bearings - Install
3054E Industrial Engine Electronic Control Module - Remove and Install
C15 On-highway Engine Air Compressor - Remove and Install
G3304 and G3306 Engines Spark Plug Adapter - Remove and Install
3618 Engine Cooling System Coolant - Change
3618 Engine Cooling System Coolant Sample (Level 1) - Obtain
Cold Weather Recommendations for On-Highway Diesel Truck Engines Starting Recommendations
3618 Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
G3304 and G3306 Engines Aftercooler - Remove
3618 Engine Driven Equipment - Check
3054E Industrial Engine Crankshaft Rear Seal - Remove
2003/05/01 Installation Procedure for a Thermocouple in the Exhaust of a Marine Engine {7498}
G3304 and G3306 Engines Aftercooler - Install
C1.5 and C2.2 Generator Generator - Install