"Maintenance Indicator Mode"
The Engine Control Module (ECM) records data that is related to the vehicle's maintenance. If "Distance" is selected, all maintenance indications on the service tool will be displayed in distance. Typical maintenance indications are "PM 1", "PM 2" and the "Coolant Flush/Fill".
If "Hour" is selected, all maintenance indications on the service tool will be displayed in hours. Typical maintenance indications are "PM 1", "PM 2" and the "Coolant Flush/Fill". The ECM provides "PM 1" maintenance interval and last maintenance information.
Alternative     | Default     |
"Manual Distance" "Manual Hours" "Automatic Distance" "Automatic Hours"     |
"OFF"     |
"PM 1 Interval (Manual Maintenance Indicator Mode)"
The "PM 1 Interval" allows a maintenance interval ("PM 1") to be specified by the user. This parameter ("PM 1 Interval") must be programmed only when the "Maintenance Indicator Mode" is programmed to a manual mode (distance or hours).
"Manual Distance"     | ||
Minimum     | Maximum     | Default     |
8047 km (5000 miles)     |
56327 km (35000 miles)     |
24140 km (15000 miles)     |
"Manual Hours"     | ||
Minimum     | Maximum     | Default     |
100     | 750     | 250     |
"Engine Oil Capacity" (Automatic Maintenance Indicator Mode)
The "PM 1 Interval" can be determined by the ECM. The ECM bases the "PM 1 Interval" on fuel usage. This parameter must be programmed only when the "Maintenance Indicator Mode" is programmed to an automatic mode (distance or hours). Capacity of the sump influences the maintenance interval.
Minimum     | Maximum     | Default     |
19 L (20 qt)     |
57 L (60 qt)     |
31 L (33 qt)     |