Crankshaft Rear Seal - Remove
拆卸步骤
开始:
- 拆下飞轮。 请参阅拆解和组装, "飞轮 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将调整螺钉 (1) 从壳体组件 (2) 上拆下。
Show/hide table
图 1 | g00991388 |
注: 曲轴后油封不可维修。 如果卸下曲轴后油封,必须更换整个壳体组件。
- 将壳体组件 (2) 从缸体上拆下。 废弃壳体组件 (2) 。
Caterpillar Information System:
3618 Engine Driven Equipment - Check
G3304 and G3306 Engines Aftercooler - Remove
3618 Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Cold Weather Recommendations for On-Highway Diesel Truck Engines Starting Recommendations
3618 Engine Cooling System Coolant Sample (Level 1) - Obtain
3618 Engine Cooling System Coolant - Change
G3304 and G3306 Engines Spark Plug Adapter - Remove and Install
C15 On-highway Engine Air Compressor - Remove and Install
C7 Engines for Combat and Tactical Vehicles Truck Manufacture Parameters
C7 Engines for Combat and Tactical Vehicles Vehicle Speed Parameters
G3304 and G3306 Engines Spark Plugs - Remove and Install
C7 Engines for Combat and Tactical Vehicles Trip Parameters
2003/05/01 Installation Procedure for a Thermocouple in the Exhaust of a Marine Engine {7498}
G3304 and G3306 Engines Aftercooler - Install
C1.5 and C2.2 Generator Generator - Install
G3304 and G3306 Engines Valve Lifter - Install
C7 On-highway Engine Water Pump - Remove
G3304 and G3306 Engines Carburetor - Install
G3304 and G3306 Engines Carburetor - Remove
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 1495 - FMI 02 Injector Trim Codes Not Programmed
3500B Engines Air Inlet and Exhaust Lines
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Maintenance Interval Schedule
3044C Industrial Engine Gauges and Indicators
C1.5 and C2.2 Generator Lead Connections