Carburetor - Remove
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Turn off the fuel supply line to the gas pressure regulator.
Show/hide table
Illustration 1 g00991569 - Loosen two clamps (1) and slide the hose away from carburetor (2).
Show/hide table
Illustration 2 g00991572 - Disconnect control rod (3) from carburetor control lever (4).
Show/hide table
Illustration 3 g00991574 - Remove clamp (5) from the joint assembly.
Show/hide table
Illustration 4 g00991576 - Remove four bolts (6).
- Remove carburetor (2) and the gasket from the aftercooler housing.
Caterpillar Information System:
G3304 and G3306 Engines Carburetor - Install
C7 On-highway Engine Water Pump - Remove
G3304 and G3306 Engines Valve Lifter - Install
C1.5 and C2.2 Generator Generator - Install
G3304 and G3306 Engines Aftercooler - Install
2003/05/01 Installation Procedure for a Thermocouple in the Exhaust of a Marine Engine {7498}
3054E Industrial Engine Crankshaft Rear Seal - Remove
3618 Engine Driven Equipment - Check
G3304 and G3306 Engines Aftercooler - Remove
3618 Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Cold Weather Recommendations for On-Highway Diesel Truck Engines Starting Recommendations
3618 Engine Cooling System Coolant Sample (Level 1) - Obtain
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 1495 - FMI 02 Injector Trim Codes Not Programmed
3500B Engines Air Inlet and Exhaust Lines
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Maintenance Interval Schedule
3044C Industrial Engine Gauges and Indicators
C1.5 and C2.2 Generator Lead Connections
G3304 and G3306 Engines Water Pump - Remove
3054E Industrial Engine Flywheel - Install
G3304 and G3306 Engines Water Pump - Install
G3304 and G3306 Engines Water Pump - Disassemble
Installation Guide for Industrial Electronic Engine Displays General Information
3618 Engine Engine Mounts - Inspect
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070} Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}