Time Delay Relay
Show/hide table
| |
| Illustration 1 | g00876065 |
Operating voltage range ... 8 to 40 VDC
Operating temperature range ...
On delay
Control 1 ... No delay on setting (0 seconds)
Control 2 ... 8 to 20 second delay on setting
Off delay
Control 1 ... 60 to 80 second delay on resetting
Control 2 ... 60 to 80 second delay on resetting
Caterpillar Information System:
2002/03/01 Change to Disassembly and Assembly Manual {1157}
G3612 and G3616 Engines Inlet Air Temperature Sensor - Remove and Install
3056E Industrial Engine Exhaust Manifold
G3612 and G3616 Engines Electronic Control Module - Remove and Install
2002/03/01 New Specification For The Minimum Fuel Pressure At The Inlet To The Fuel Transfer Pump {1274}
G3612 and G3616 Engines Integrated Combustion Sensing Module (ICSM) - Remove and Install
Setup of the Machine Security System{7631} Setup of the Machine Security System{7631}
3176C and 3196 Engines for Caterpillar Built Machines Connecting Rod
G3612 and G3616 Engines Water Pump Pressure Switch - Remove and Install
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for Multiple Module Unit
3412E and C30 Engines Connecting Rod
SR4 Generator with VR3 or VR4 Voltage Regulator Coupling - Remove
3412E and C30 Engines Piston and Rings
2002/04/01 Change to Disassembly and Assembly Manual {1157}
G3612 and G3616 Engines Ignition Wiring Harness - Remove and Install
3126E On-highway Engine Engine Oil Pump - Disassemble
3126E On-highway Engine Engine Oil Pump - Assemble
3500 Generator Set Engines Sending Unit - Engine Oil Pressure
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Sending Unit
G3612 and G3616 Engines Engine Speed/Timing Sensor - Remove and Install
2002/03/01 Change to Specifications Manual {1157}
G3408C and G3412C Engines Carburetor Control Linkage
C-12 Marine Engines Fuel Filter Base - Remove
C-12 Marine Engines Fuel Filter Base - Install