G3612 and G3616 Engines Caterpillar


Water Pump Pressure Switch - Remove and Install

Usage:

G3612 BKE

拆卸步骤


注意

在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。



注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g00875791

  1. 排出发动机中的冷却液。

  2. 断开接头 (1) 处的配线线束。

  3. 拆下压力开关 (2)。

安装步骤


注意

在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。



注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 2g00875791

  1. 安装压力开关 (2)。

  2. 连接接头 (1) 处的配线线束。

  3. 向冷却系统加注冷却液到正确的液位。 请参阅操作和维护手册。

Caterpillar Information System:

UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for Multiple Module Unit
3412E and C30 Engines Connecting Rod
SR4 Generator with VR3 or VR4 Voltage Regulator Coupling - Remove
2002/03/01 Caterpillar Electronic Technician (ET) Software Is Now Available For G3400 Engines And G3500 Engines That Are Equipped With An Electronic Ignition System (EIS) Or Air/Fuel Ratio Controls {0785}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Programming Parameters
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modes Of Operation
2002/03/25 A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/01 A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
3500 Industrial Engine Attachments Troubleshooting
3126B Truck Engine Exhaust Particulate Filter - Clean
3126B Truck Engine Exhaust Particulate Filter - Test
3412E and C30 Engines Engine Design
3176C and 3196 Engines for Caterpillar Built Machines Connecting Rod
Setup of the Machine Security System{7631} Setup of the Machine Security System{7631}
G3612 and G3616 Engines Integrated Combustion Sensing Module (ICSM) - Remove and Install
2002/03/01 New Specification For The Minimum Fuel Pressure At The Inlet To The Fuel Transfer Pump {1274}
G3612 and G3616 Engines Electronic Control Module - Remove and Install
3056E Industrial Engine Exhaust Manifold
G3612 and G3616 Engines Inlet Air Temperature Sensor - Remove and Install
2002/03/01 Change to Disassembly and Assembly Manual {1157}
3500 Generator Set Engines Time Delay Relay
3412E and C30 Engines Piston and Rings
2002/04/01 Change to Disassembly and Assembly Manual {1157}
G3612 and G3616 Engines Ignition Wiring Harness - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.