G3612 and G3616 Engines Caterpillar


Integrated Combustion Sensing Module (ICSM) - Remove and Install

Usage:

G3612 BKE

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g00875828

  1. 切断供电。

  2. 卸下固定前盖 (2) 的螺栓 (1)。

  3. 拆下前盖。


    图 2g00875865

  4. 卸下热电偶线束的接头 (3)。

  5. 记录线束的原始位置并卸下接头 (5)。

  6. 卸下线束接头 (6)。

  7. 卸下安装螺栓 (4) 和模块。

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 3g00875865

  1. 安装模块和安装螺栓 (4)。

  2. 连接线束接头 (6)。

  3. 将线束 (5) 连接到原始位置。

  4. 连接热电偶线束 (3)。


    图 4g00875828

  5. 安装盖 (2) 和螺栓 (1)。

  6. 连接电源。

Caterpillar Information System:

Setup of the Machine Security System{7631} Setup of the Machine Security System{7631}
3176C and 3196 Engines for Caterpillar Built Machines Connecting Rod
G3612 and G3616 Engines Water Pump Pressure Switch - Remove and Install
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for Multiple Module Unit
3412E and C30 Engines Connecting Rod
SR4 Generator with VR3 or VR4 Voltage Regulator Coupling - Remove
2002/03/01 Caterpillar Electronic Technician (ET) Software Is Now Available For G3400 Engines And G3500 Engines That Are Equipped With An Electronic Ignition System (EIS) Or Air/Fuel Ratio Controls {0785}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Programming Parameters
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modes Of Operation
2002/03/25 A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/01 A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
3500 Industrial Engine Attachments Troubleshooting
2002/03/01 New Specification For The Minimum Fuel Pressure At The Inlet To The Fuel Transfer Pump {1274}
G3612 and G3616 Engines Electronic Control Module - Remove and Install
3056E Industrial Engine Exhaust Manifold
G3612 and G3616 Engines Inlet Air Temperature Sensor - Remove and Install
2002/03/01 Change to Disassembly and Assembly Manual {1157}
3500 Generator Set Engines Time Delay Relay
3412E and C30 Engines Piston and Rings
2002/04/01 Change to Disassembly and Assembly Manual {1157}
G3612 and G3616 Engines Ignition Wiring Harness - Remove and Install
3126E On-highway Engine Engine Oil Pump - Disassemble
3126E On-highway Engine Engine Oil Pump - Assemble
3500 Generator Set Engines Sending Unit - Engine Oil Pressure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.