Change to Specifications Manual {1157}
- Truck Engines:
- C-10 (S/N: 2PN; 3CS; 8YS)
- C-12 (S/N: 1YN; 2KS; 9NS; 9SM; CPD)
Reference: A torque sequence for the bolts that mount the flywheel housing to the cylinder block has been added to the specifications for the flywheel housings on these truck engines. This change is shown in the text that follows. This change will be included in the next revision of these manuals.
Show/hide table
Illustration 1 | g00877665 |
(1) Apply 1U-6396 O-Ring Assembly Compound to the O-Ring. Install the O-Ring.
Show/hide table
Illustration 2 | g00877668 |
Show/hide table
Illustration 3 | g00871606 |
Torque sequence |
(2) Flywheel housing
(3) Apply 1U-8846 Sealant on the gasket surface of the flywheel housing. Assemble the flywheel housing to the cylinder block and tighten within ten minutes of applying the sealant. Use the torque sequence that is shown in Illustration 3 to tighten the bolts.
(4) Cylinder block
Caterpillar Information System:
G3612 and G3616 Engines Engine Speed/Timing Sensor - Remove and Install
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Sending Unit
3500 Generator Set Engines Sending Unit - Engine Oil Pressure
3126E On-highway Engine Engine Oil Pump - Assemble
3126E On-highway Engine Engine Oil Pump - Disassemble
G3612 and G3616 Engines Ignition Wiring Harness - Remove and Install
2002/04/01 Change to Disassembly and Assembly Manual {1157}
3412E and C30 Engines Piston and Rings
3500 Generator Set Engines Time Delay Relay
2002/03/01 Change to Disassembly and Assembly Manual {1157}
G3612 and G3616 Engines Inlet Air Temperature Sensor - Remove and Install
3056E Industrial Engine Exhaust Manifold
G3408C and G3412C Engines Carburetor Control Linkage
C-12 Marine Engines Fuel Filter Base - Remove
C-12 Marine Engines Fuel Filter Base - Install
C280-16 Petroleum Engine Pressure Switch
3126B Marine Engines CID 0320 FMI 11 Speed/Timing Sensor mechanical failure
3500 Generator Set Engines Pressure Switch
3500 Generator Set Engines Pressure Switch
3056E Industrial Engine Inlet Manifold
2002/04/01 Marine Transmission Oil Pressure Sensor Location {3323}
G3612 and G3616 Engines Turbocharger - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines Camshaft
G3612 and G3616 Engines Turbocharger - Assemble