Engine Oil Filter Base - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 185-3630     | Strap Wrench Assembly     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove oil filter assembly (1) with Tool (A) .
Show/hide table
Illustration 1 | g00849440 |
- Remove two bolts (5) and the washers.
- Remove four bolts (3) and the washers.
- Remove six bolts (2) and the washers.
- Remove oil filter base assembly (4) and the O-ring seals.
Caterpillar Information System:
3176C and 3196 Marine Engines Electric Starting Motor - Remove and Install
3408E and 3412E Industrial Engines Valve Rocker Arms and Lifters
C-12 Marine Engines Cylinder Head - Install
3176C and 3196 Marine Engines Rocker Shaft and Pushrod - Install
3176C and 3196 Marine Engines Speed/Timing Sensor - Remove and Install
3176C and 3196 Marine Engines Crankshaft Rear Seal - Install
2000/02/01 Correction to Specifications Module, SENR6436-00, "3114 & 3116 Diesel Truck Engines" {1201}
3176C and 3196 Marine Engines Crankshaft Rear Seal - Remove
3176C and 3196 Marine Engines Crankshaft Front Seal - Install
3176C and 3196 Marine Engines Crankshaft Front Seal - Remove
3176C and 3196 Marine Engines Cylinder Liner - Install
3500B and 3500B High Displacement Generator Set Engines Electronic Control Terms
2000/05/01 New Format of PC Software for Customer Communication Module {1926}
3176C and 3196 Marine Engines Engine Oil Filter Base - Install
3176C and 3196 Marine Engines Engine Oil Filter Base - Disassemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Assemble
3176C and 3196 Marine Engines Engine Oil Cooler - Remove
3126B and 3126E On-highway Engines Customer Passwords
325D and 329D Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
3176C and 3196 Marine Engines Engine Oil Cooler - Install
3176C and 3196 Marine Engines Engine Oil Pump - Remove
3176C and 3196 Marine Engines Engine Oil Pump - Install
3176C and 3196 Marine Engines Engine Oil Pump - Disassemble
3176C and 3196 Marine Engines Engine Oil Pump - Assemble