Rocker Shaft and Pushrod - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the valve bridge assemblies. Apply clean engine oil to the top surface of the valve bridge assemblies.
- Install pushrods (3) in the original location in the engine.
Show/hide table
Illustration 1 | g00684105 |
- Position rocker arm assembly (2) in the original location on the engine. Install bolts (1). Tighten the bolts to a torque of 100 ± 20 N·m (75 ± 15 lb ft).
- Adjust the engine valve lash. Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust".
End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Caterpillar Information System:
3176C and 3196 Marine Engines Speed/Timing Sensor - Remove and Install
3176C and 3196 Marine Engines Crankshaft Rear Seal - Install
2000/02/01 Correction to Specifications Module, SENR6436-00, "3114 & 3116 Diesel Truck Engines" {1201}
3176C and 3196 Marine Engines Crankshaft Rear Seal - Remove
3176C and 3196 Marine Engines Crankshaft Front Seal - Install
3176C and 3196 Marine Engines Crankshaft Front Seal - Remove
3176C and 3196 Marine Engines Cylinder Liner - Install
3500B and 3500B High Displacement Generator Set Engines Electronic Control Terms
3176C and 3196 Marine Engines Cylinder Liner - Remove
Product Link 151/201 System Overview
3408E and 3412E Engines for Caterpillar Built Machines Engine Design
3176C and 3196 Marine Engines Crankshaft Main Bearings - Install
C-12 Marine Engines Cylinder Head - Install
3408E and 3412E Industrial Engines Valve Rocker Arms and Lifters
3176C and 3196 Marine Engines Electric Starting Motor - Remove and Install
3176C and 3196 Marine Engines Engine Oil Filter Base - Remove
2000/05/01 New Format of PC Software for Customer Communication Module {1926}
3176C and 3196 Marine Engines Engine Oil Filter Base - Install
3176C and 3196 Marine Engines Engine Oil Filter Base - Disassemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Assemble
3176C and 3196 Marine Engines Engine Oil Cooler - Remove
3126B and 3126E On-highway Engines Customer Passwords
325D and 329D Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
3176C and 3196 Marine Engines Engine Oil Cooler - Install