Engine Oil Filter Base - Assemble
Assembly Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Inspect the condition of the O-ring seals. Replace the seals, if necessary.
- Install the stud that holds the oil filter to the oil filter base. Tighten the stud to a torque of 68 ± 7 N·m (50 ± 5 lb ft).
- Install relief valve plunger (15) and spring (14) into oil filter base.
Show/hide table
Illustration 1 | g00850052 |
Typical example |
- Place the O-ring seal on cover (12) and install the plug in oil filter base.
- Install the following items in oil filter base: oil pump bypass valve (7), spring (8) and O-ring seal (9) .
Show/hide table
Illustration 2 | g00849701 |
- Install cover (10) and the two bolts with washers that hold the cover in place.
- Install O-ring seal (9) and valve (11) in oil filter base.
- Install the two bolts with washers that hold valve (11) in place.
- Install the following items in oil filter base: retainer (4), retainer spring (3), seat of the relief valve spring (2) and spacer (5) .
Show/hide table
Illustration 3 | g00849489 |
Typical example |
- Install bolt (1) .
- Install three O-ring seals (6) in the oil filter base assembly.
End By: Install the engine oil filter base.
Caterpillar Information System:
3176C and 3196 Marine Engines Engine Oil Filter Base - Disassemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Install
2000/05/01 New Format of PC Software for Customer Communication Module {1926}
3176C and 3196 Marine Engines Engine Oil Filter Base - Remove
3176C and 3196 Marine Engines Electric Starting Motor - Remove and Install
3408E and 3412E Industrial Engines Valve Rocker Arms and Lifters
C-12 Marine Engines Cylinder Head - Install
3176C and 3196 Marine Engines Rocker Shaft and Pushrod - Install
3176C and 3196 Marine Engines Speed/Timing Sensor - Remove and Install
3176C and 3196 Marine Engines Crankshaft Rear Seal - Install
2000/02/01 Correction to Specifications Module, SENR6436-00, "3114 & 3116 Diesel Truck Engines" {1201}
3176C and 3196 Marine Engines Crankshaft Rear Seal - Remove
3176C and 3196 Marine Engines Engine Oil Cooler - Remove
3126B and 3126E On-highway Engines Customer Passwords
325D and 329D Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
3176C and 3196 Marine Engines Engine Oil Cooler - Install
3176C and 3196 Marine Engines Engine Oil Pump - Remove
3176C and 3196 Marine Engines Engine Oil Pump - Install
3176C and 3196 Marine Engines Engine Oil Pump - Disassemble
3176C and 3196 Marine Engines Engine Oil Pump - Assemble
3176C and 3196 Marine Engines Engine Oil Pan - Remove and Install
3408C, 3412C and 3412D High Performance Marine Engines Cylinder Head Valves
3176C and 3196 Marine Engines Engine Oil Pressure Sensor - Remove and Install
3126B and 3126E On-highway Engines ECM Snapshot