Engine Oil Pressure Sensor - Remove and Install
Removal Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect engine oil pressure sensor connector (1) .
Show/hide table
Illustration 1 | g00673642 |
- Remove the engine oil pressure sensor (2) .
Installation Procedure
- Install the engine oil pressure sensor (2) .
Show/hide table
Illustration 2 | g00673642 |
- Connect the engine oil pressure sensor connector (1) .
Caterpillar Information System:
3408C, 3412C and 3412D High Performance Marine Engines Cylinder Head Valves
3176C and 3196 Marine Engines Engine Oil Pan - Remove and Install
3176C and 3196 Marine Engines Engine Oil Pump - Assemble
3176C and 3196 Marine Engines Engine Oil Pump - Disassemble
3176C and 3196 Marine Engines Engine Oil Pump - Install
3176C and 3196 Marine Engines Engine Oil Pump - Remove
3176C and 3196 Marine Engines Engine Oil Cooler - Install
325D and 329D Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
3126B and 3126E On-highway Engines Customer Passwords
3176C and 3196 Marine Engines Engine Oil Cooler - Remove
3176C and 3196 Marine Engines Engine Oil Filter Base - Assemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Disassemble
3126B and 3126E On-highway Engines ECM Snapshot
3408E and 3412E Industrial Engines Cylinder Head
3176C and 3196 Marine Engines Flywheel - Remove
3176C and 3196 Marine Engines Flywheel - Install
3176C and 3196 Marine Engines Front Cover - Remove
3176C and 3196 Marine Engines Front Cover - Install
3500B High Displacement Locomotive Engines Automatic Altitude Compensation
3176C and 3196 Marine Engines Gear Group (Front) - Remove
3176C and 3196 Marine Engines Gear Group (Front) - Install
3608 Engine Valve Lash and Valve Bridge Adjustment
Electronic Modular Control Panel II+ (EMCP II+) Shutdown Mode - For PEEC and EUI Engines
3176C and 3196 Marine Engines Housing (Front) - Remove