Engine Oil Pump - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1) and the washers that hold the tube to the elbow of the oil pump.
Show/hide table
Illustration 1 | g00512289 |
- Remove bolts (2) and the washers that hold the elbow of oil pump (3) to the cylinder block.
- Remove bolts (4) and the washers that hold the engine oil pump to the front housing. Remove the engine oil pump and the elbow as a unit.
Show/hide table
Illustration 2 | g00512297 |
- Remove the two O-ring seals. One O-ring seal is on the connection of the tube to the elbow. The second O-ring seal is on the engine oil pump.
Caterpillar Information System:
3176C and 3196 Marine Engines Engine Oil Cooler - Install
325D and 329D Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
3126B and 3126E On-highway Engines Customer Passwords
3176C and 3196 Marine Engines Engine Oil Cooler - Remove
3176C and 3196 Marine Engines Engine Oil Filter Base - Assemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Disassemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Install
2000/05/01 New Format of PC Software for Customer Communication Module {1926}
3176C and 3196 Marine Engines Engine Oil Filter Base - Remove
3176C and 3196 Marine Engines Electric Starting Motor - Remove and Install
3408E and 3412E Industrial Engines Valve Rocker Arms and Lifters
C-12 Marine Engines Cylinder Head - Install
3176C and 3196 Marine Engines Engine Oil Pump - Install
3176C and 3196 Marine Engines Engine Oil Pump - Disassemble
3176C and 3196 Marine Engines Engine Oil Pump - Assemble
3176C and 3196 Marine Engines Engine Oil Pan - Remove and Install
3408C, 3412C and 3412D High Performance Marine Engines Cylinder Head Valves
3176C and 3196 Marine Engines Engine Oil Pressure Sensor - Remove and Install
3126B and 3126E On-highway Engines ECM Snapshot
3408E and 3412E Industrial Engines Cylinder Head
3176C and 3196 Marine Engines Flywheel - Remove
3176C and 3196 Marine Engines Flywheel - Install
3176C and 3196 Marine Engines Front Cover - Remove
3176C and 3196 Marine Engines Front Cover - Install