Engine Oil Filter Base - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 185-3630     | Strap Wrench Assembly     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Inspect the condition of the O-ring seals. Replace the seals, if necessary.
Note: Place all O-ring seals and install all bolts finger tight before tightening to the standard torque.
- Install the O-ring seals in oil filter base assembly (4). Position the oil filter base assembly on the cylinder block.
Show/hide table
Illustration 1 | g00849440 |
- Install four bolts (2) and the washers.
- Install four bolts (3) and the washers.
- Install two bolts (5) and the washers.
- Install oil filter assembly (1) with Tool (A). Follow the instructions with the oil filter assembly for the correct installation.
Caterpillar Information System:
2000/05/01 New Format of PC Software for Customer Communication Module {1926}
3176C and 3196 Marine Engines Engine Oil Filter Base - Remove
3176C and 3196 Marine Engines Electric Starting Motor - Remove and Install
3408E and 3412E Industrial Engines Valve Rocker Arms and Lifters
C-12 Marine Engines Cylinder Head - Install
3176C and 3196 Marine Engines Rocker Shaft and Pushrod - Install
3176C and 3196 Marine Engines Speed/Timing Sensor - Remove and Install
3176C and 3196 Marine Engines Crankshaft Rear Seal - Install
2000/02/01 Correction to Specifications Module, SENR6436-00, "3114 & 3116 Diesel Truck Engines" {1201}
3176C and 3196 Marine Engines Crankshaft Rear Seal - Remove
3176C and 3196 Marine Engines Crankshaft Front Seal - Install
3176C and 3196 Marine Engines Crankshaft Front Seal - Remove
3176C and 3196 Marine Engines Engine Oil Filter Base - Disassemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Assemble
3176C and 3196 Marine Engines Engine Oil Cooler - Remove
3126B and 3126E On-highway Engines Customer Passwords
325D and 329D Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
3176C and 3196 Marine Engines Engine Oil Cooler - Install
3176C and 3196 Marine Engines Engine Oil Pump - Remove
3176C and 3196 Marine Engines Engine Oil Pump - Install
3176C and 3196 Marine Engines Engine Oil Pump - Disassemble
3176C and 3196 Marine Engines Engine Oil Pump - Assemble
3176C and 3196 Marine Engines Engine Oil Pan - Remove and Install
3408C, 3412C and 3412D High Performance Marine Engines Cylinder Head Valves