Engine Oil Pump - Assemble
Assembly Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install drive shaft (4) in the pump housing.
Show/hide table
Illustration 1 | g01106496 |
Note: Lubricate all internal parts of the engine oil pump with clean engine oil.
- Raise the temperature of gear (5) .
- Install gear (5) on the end of drive shaft (4). Position the gear so the distance between the outside face of the gear and the step face on the pump body is 29.40 ± 0.50 mm (1.158 ± 0.020 inch).
- Install idler gear (7) in the pump housing.
- Install O-ring seal (6) in cover (3) .
- Install cover (3) and bolts (2) .
Show/hide table
Illustration 2 | g00512335 |
- Install the O-ring seals and elbow (1) on the engine oil pump.
Show/hide table
NOTICE |
---|
The pump must rotate freely by hand after assembly. |
End By: Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar Information System:
3176C and 3196 Marine Engines Engine Oil Pump - Disassemble
3176C and 3196 Marine Engines Engine Oil Pump - Install
3176C and 3196 Marine Engines Engine Oil Pump - Remove
3176C and 3196 Marine Engines Engine Oil Cooler - Install
325D and 329D Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
3126B and 3126E On-highway Engines Customer Passwords
3176C and 3196 Marine Engines Engine Oil Cooler - Remove
3176C and 3196 Marine Engines Engine Oil Filter Base - Assemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Disassemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Install
2000/05/01 New Format of PC Software for Customer Communication Module {1926}
3176C and 3196 Marine Engines Engine Oil Filter Base - Remove
3176C and 3196 Marine Engines Engine Oil Pan - Remove and Install
3408C, 3412C and 3412D High Performance Marine Engines Cylinder Head Valves
3176C and 3196 Marine Engines Engine Oil Pressure Sensor - Remove and Install
3126B and 3126E On-highway Engines ECM Snapshot
3408E and 3412E Industrial Engines Cylinder Head
3176C and 3196 Marine Engines Flywheel - Remove
3176C and 3196 Marine Engines Flywheel - Install
3176C and 3196 Marine Engines Front Cover - Remove
3176C and 3196 Marine Engines Front Cover - Install
3500B High Displacement Locomotive Engines Automatic Altitude Compensation
3176C and 3196 Marine Engines Gear Group (Front) - Remove
3176C and 3196 Marine Engines Gear Group (Front) - Install