Engine Oil Cooler - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Inspect the condition of the O-ring seals. Replace the seals, if necessary.
- Install O-ring seal (9). Position engine oil cooler bonnet (10) in hose (8) .
Show/hide table
Illustration 1 | g00513712 |
Typical example |
- Install the two O-ring seals on the oil filter base. Position the oil cooler (4) on the oil filter base.
Show/hide table
Illustration 2 | g00684073 |
Typical example |
Show/hide table
Illustration 3 | g00684065 |
Typical example |
- Install two bolts (6) with washers and two bolts (3) with washers.
- Install three bolts (5) with washers. Tighten hose clamp (7) .
- Install the O-ring seals on elbow (1) of the engine oil cooler.
- Lubricate the bore lightly with glycerin. Position the elbow of the engine oil cooler on engine oil cooler core (4) .
- Install three bolts (2) and the washers.
- Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual for the correct filling procedure.
Caterpillar Information System:
325D and 329D Excavators Hydraulic System Cylinders (Boom, Stick and Bucket)
3126B and 3126E On-highway Engines Customer Passwords
3176C and 3196 Marine Engines Engine Oil Cooler - Remove
3176C and 3196 Marine Engines Engine Oil Filter Base - Assemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Disassemble
3176C and 3196 Marine Engines Engine Oil Filter Base - Install
2000/05/01 New Format of PC Software for Customer Communication Module {1926}
3176C and 3196 Marine Engines Engine Oil Filter Base - Remove
3176C and 3196 Marine Engines Electric Starting Motor - Remove and Install
3408E and 3412E Industrial Engines Valve Rocker Arms and Lifters
C-12 Marine Engines Cylinder Head - Install
3176C and 3196 Marine Engines Rocker Shaft and Pushrod - Install
3176C and 3196 Marine Engines Engine Oil Pump - Remove
3176C and 3196 Marine Engines Engine Oil Pump - Install
3176C and 3196 Marine Engines Engine Oil Pump - Disassemble
3176C and 3196 Marine Engines Engine Oil Pump - Assemble
3176C and 3196 Marine Engines Engine Oil Pan - Remove and Install
3408C, 3412C and 3412D High Performance Marine Engines Cylinder Head Valves
3176C and 3196 Marine Engines Engine Oil Pressure Sensor - Remove and Install
3126B and 3126E On-highway Engines ECM Snapshot
3408E and 3412E Industrial Engines Cylinder Head
3176C and 3196 Marine Engines Flywheel - Remove
3176C and 3196 Marine Engines Flywheel - Install
3176C and 3196 Marine Engines Front Cover - Remove