Fan Drive - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Put fan drive (4) in position on the engine.
Show/hide table
Illustration 1 | g00645593 |
- Install four bolts (3) that fasten the fan drive to the cylinder block. Tighten bolts (3) to the following torque:
M8 bolts ... 22 N·m (16 lb ft)
M10 bolts ... 44 N·m (32 lb ft)
- Put fan pulley (2) in position on the fan drive.
Show/hide table
Illustration 2 | g00645588 |
- Put fan spacer (1) in position on the fan drive.
Show/hide table
Illustration 3 | g00645579 |
End By: Install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Caterpillar Information System:
3126B Marine Engine Engine Oil Cooler - Install
3126B Marine Engine Engine Oil Cooler - Remove
3054B Industrial Engine Fan Drive - Remove
3054B Industrial Engine Valve Mechanism Cover - Remove and Install
3618 Engine Piston and Connecting Rods - Install
3054B Industrial Engine Water Outlet Manifold - Install
3612 and 3616 Engines Crankshaft - Install
3126B Marine Engine Water Pump - Disassemble
3126B Marine Engine Water Temperature Regulator - Remove and Install
3054B Industrial Engine Water Outlet Manifold - Remove
Caterpillar Monitoring System for Electronic Modular Control Panel CID 0827 FMI 08 Temperature Sensor (Left Exhaust) Abnormal Signal - Test
G3412C, G3508, G3512, G3516, G3606, G3608, G3612 and G3616 Engines Customer Communication Module General Wiring Diagram
3512B Marine Auxiliary Engine Low Idle/High Idle Switch
SR4 HV and SR4B HV Generators Continuous Operation
SR4 HV and SR4B HV Generators Rotating Rectifier - Check
3512B Marine Auxiliary Engine Black Start Push Button
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Glossary
3126B Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
3126B Marine Engine Water Pump - Assemble
3126B and 3126E On-highway Engines 0168-02 ECM Battery Power Intermittent (51)
3126B Marine Engine Turbocharger - Remove
3126B Marine Engine Turbocharger - Install
3054B Industrial Engine Piston Cooling Jets - Remove and Install
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application 0030-08 Invalid PTO Throttle Signal (29)