Fan Drive - Remove
Removal Procedure
Start By:
- Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove fan spacer (1) from the fan drive. Note the position of the fan spacer during removal in order to install the fan spacer correctly.
Show/hide table
Illustration 1 | g00645579 |
- Remove fan pulley (2) from the fan drive.
Show/hide table
Illustration 2 | g00645588 |
- Remove four bolts (3) that hold fan drive (4) in position.
Show/hide table
Illustration 3 | g00645593 |
- Remove fan drive (4) from the engine. Inspect the condition of fan drive (4). If fan drive (4) is worn or damaged, use a new part for replacement.
Caterpillar Information System:
3054B Industrial Engine Valve Mechanism Cover - Remove and Install
3618 Engine Piston and Connecting Rods - Install
3054B Industrial Engine Water Outlet Manifold - Install
3612 and 3616 Engines Crankshaft - Install
3126B Marine Engine Water Pump - Disassemble
3126B Marine Engine Water Temperature Regulator - Remove and Install
3054B Industrial Engine Water Outlet Manifold - Remove
Caterpillar Monitoring System for Electronic Modular Control Panel CID 0827 FMI 08 Temperature Sensor (Left Exhaust) Abnormal Signal - Test
G3412C, G3508, G3512, G3516, G3606, G3608, G3612 and G3616 Engines Customer Communication Module General Wiring Diagram
3612 and 3616 Engines Crankshaft Main Bearings - Install
3618 Engine Piston and Connecting Rods - Remove
3126B Marine Engine Water Pump - Install
3126B Marine Engine Engine Oil Cooler - Remove
3126B Marine Engine Engine Oil Cooler - Install
3054B Industrial Engine Fan Drive - Install
3512B Marine Auxiliary Engine Low Idle/High Idle Switch
SR4 HV and SR4B HV Generators Continuous Operation
SR4 HV and SR4B HV Generators Rotating Rectifier - Check
3512B Marine Auxiliary Engine Black Start Push Button
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Glossary
3126B Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
3126B Marine Engine Water Pump - Assemble
3126B and 3126E On-highway Engines 0168-02 ECM Battery Power Intermittent (51)
3126B Marine Engine Turbocharger - Remove