Water Pump - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-9722     | Seal Driver     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Lubricate all O-ring seals with 1U-6396 O-Ring Assembly Compound prior to assembly of the water pump.
- Remove any gasket material from the mating surfaces of the water pump housing and the cover plate prior to the assembly of the water pump.
- Press the shaft and the bearing into the water pump housing.
Show/hide table
Illustration 1 | g00645936 |
- Install the new mechanical seal with Tool (A) and the press.
Show/hide table
Illustration 2 | g00645992 |
- Use a press in order to install impeller (10) on the drive shaft in the water pump.
Show/hide table
Illustration 3 | g00743397 |
- Install O-ring seal (9) in elbow (8) .
Show/hide table
Illustration 4 | g00743372 |
- Position elbow (8) on water pump (1) and install bolts (7) .
Show/hide table
Illustration 5 | g00743370 |
- Install hose nipple (6) and the O-ring seal in water pump (1) .
- Position cover plate (3) and the new gasket on water pump (1) .
Show/hide table
Illustration 6 | g00743367 |
- Install bolts (2) and washers that fasten cover plate (3) and the new gasket on water pump (1) .
- Install O-ring seals (4) and (5) in cover plate (3) .
End By: Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".
Caterpillar Information System:
3126B Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Glossary
3512B Marine Auxiliary Engine Black Start Push Button
SR4 HV and SR4B HV Generators Rotating Rectifier - Check
SR4 HV and SR4B HV Generators Continuous Operation
3512B Marine Auxiliary Engine Low Idle/High Idle Switch
3054B Industrial Engine Fan Drive - Install
3126B Marine Engine Engine Oil Cooler - Install
3126B Marine Engine Engine Oil Cooler - Remove
3054B Industrial Engine Fan Drive - Remove
3054B Industrial Engine Valve Mechanism Cover - Remove and Install
3618 Engine Piston and Connecting Rods - Install
3126B and 3126E On-highway Engines 0168-02 ECM Battery Power Intermittent (51)
3126B Marine Engine Turbocharger - Remove
3126B Marine Engine Turbocharger - Install
3054B Industrial Engine Piston Cooling Jets - Remove and Install
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application 0030-08 Invalid PTO Throttle Signal (29)
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application 0030-13 PTO Throttle Sensor Calibration (29)
3126B and 3126E On-highway Engines 0091-13 Throttle Position out of calibration (28)
3408E and 3412E Industrial Engines Electronic Service Tools
3126B and 3126E On-highway Engines 0084-01 Vehicle Speed loss of signal (31)
3126B and 3126E On-highway Engines 0084-02 Vehicle Speed signal invalid (36)
3126B and 3126E On-highway Engines 0084-08 Vehicle Speed signal out of range (36)
Uninterruptible Power Supply (UPS) 250 Time and Date Adjustment