Fuel Tank - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 2     |
- Fasten Tooling (A) to the fuel tank, as shown. Use a suitable lifting device to support the fuel tank. Install the fuel tank. The weight of the fuel tank is 80 kg (175 lb).
Show/hide table
Illustration 1 | g00363848 |
- Install four bolts (16) that secure the fuel tank to the machine. Tighten four bolts (16) to a torque of 270 ± 40 N·m (200 ± 30 lb ft).
Show/hide table
Illustration 2 | g00480545 |
This view is beneath the machine. |
- Install bolt (15) that secures the fuel hose to the fuel tank.
- Install the fuel hose and tighten hose clamp (17) .
- Connect electrical connector (14) .
Show/hide table
Illustration 3 | g00480542 |
- Install two nuts (12) that secure hose (13) to the back of the fuel tank.
- Install hose (13) and tighten hose clamp (11) .
- Install three bolts (10) and the washers that secure hand rail (9) to the machine.
Show/hide table
Illustration 4 | g00480543 |
- Install four bolts (7) and the washers that secure side panel (8) .
Show/hide table
Illustration 5 | g00480541 |
- Install bolt (6) .
Show/hide table
Illustration 6 | g00480540 |
This view is inside of the storage box. |
- Install front cover (5). Install two bolts (4) and the washers that secure front cover (5) to the machine.
Show/hide table
Illustration 7 | g00363838 |
- Secure plate (2) to the machine. Install two bolts (3) and the washers and tighten two bolts (1) .
Show/hide table
Illustration 8 | g00363835 |
- Fill the fuel tank with fuel. Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities" for the proper filling procedure and the proper level for the fuel tank.
Caterpillar Information System:
315B Excavator Machine Systems Undercarriage Frame - Remove
5130B Excavator Hydraulic System Relief Valve (Margin)
M315 Excavator Machine System Stick - 3.1 m (10.17 ft)
M315 Excavator Machine System Stick - 2.6 m (8.53 ft)
M315 Excavator Machine System Stick - 2.4 m (7.87 ft)
M315 Excavator Machine System Stick - 2.1 m (6.89 ft)
320B, 320B L and 320B N Excavators Work Tool Flow Control - If Equipped
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic Oil Cooler - Install
315B Excavator Machine Systems Swing Drive - Assemble
315B Excavator Machine Systems Fuel Tank - Remove
315B Excavator Machine Systems Counterweight - Remove and Install
M318 and M320 Excavators Machine System Specifications Control Valve (Boom Lowering)
5230 Excavator Hydraulic System Hydraulic System Troubleshooting
315B Excavator Machine Systems Seat - Remove and Install
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Remove
M315 Excavator Machine System Bucket Cylinder
315B Excavator Machine Systems Cab - Remove
330B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Install
330B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
330B Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
315B and 315B L Excavator Supplement For 3046 Engine Coolant Tank (Expansion) - Remove and Install
5130 Excavator Hydraulic System Check Valve (Swing and Travel Back Pressure)
315B Excavator Machine Systems Cab - Install